Fablon Self Adhesive Wrap - Deep Walnut Woodgrain

Orders for Fablon Self Adhesive Wrap up to 15 meters will be supplied as one continuous piece.

Fablon Self Adhesive Wrap is primarily designed for indoor use. Prolonged exposure to UV rays and weather conditions may affect its appearance and adhesion.

The wrap itself is water-resistant, making it suitable for kitchen and bathroom applications where it may come into contact with moisture. However, it is not fully waterproof, and prolonged immersion in water should be avoided.

Gently heat the wrap with a hairdryer on a low setting to soften the adhesive. Carefully peel it back slowly at an angle. If residue remains, it can usually be removed with a mild adhesive remover.

This is generally not recommended. The wrap requires a smooth, firm surface. Applying it over wallpaper may result in uneven adhesion and potential damage to the wallpaper upon removal.

Each unit measures 1 meter in length and 67.5cm in width.

Gently lift the affected section of the wrap and reapply, using a squeegee or credit card to smooth it out firmly from the center outwards. For small bubbles, a pinprick can release trapped air.

Ensure the surface is thoroughly cleaned and dried before application. Reheat the adhesive slightly with a hairdryer on a low setting if needed, and press firmly.

Use a sharp, fresh craft knife or utility blade for clean cuts. A metal ruler can be used as a guide for straight edges.

This may indicate excessive wear or improper cleaning. Gentle cleaning with a damp cloth is recommended. For minor scratches, a hairdryer on low heat may help minimize their appearance.