Flymo SimpliMow 320

The Flymo SimpliMow 320 is specifically designed and recommended for smaller gardens due to its compact size, 32cm cutting width, and 1000W motor.

The cutting height can be adjusted in three simple steps, ranging from 20mm to 60mm. Refer to your user manual for the exact mechanism, which typically involves a lever or wheel adjustment on the mower body.

Yes, the 30L grass box is designed for easy emptying. Simply detach it from the mower, dispose of the clippings, and reattach.

The mower features convenient cable storage hooks on the handle, allowing you to neatly wrap and secure the power cable when the mower is not in use.

The Flymo SimpliMow 320 uses a high-quality 32cm metal blade, designed for a precise and clean cut.

No, the Flymo SimpliMow 320 is described as a lightweight mower, which makes it easy to maneuver and transport using its central carry handle. (Info needed: precise weight in kg)

It is generally not recommended to mow wet grass with any electric lawnmower, including the SimpliMow 320. Wet grass can clog the mower, reduce cutting efficiency, and pose an electrical hazard.

Check if the power cable is securely plugged into both the mower and a working power outlet. Ensure any safety switches or levers on the handle are fully engaged. Verify that the RCD has not tripped. If the mower overheated, it might have a thermal cut-out; allow it to cool down before trying again.

Ensure the cutting height is set appropriately for the grass length. Very long or wet grass can clog the mower; avoid cutting wet grass. Check the 32cm metal blade for sharpness and damage; a dull blade will tear rather than cut. Clear any accumulated grass clippings from beneath the deck.

Check if the grass box is correctly attached and not overfilled. Ensure the cutting height is not set too low for the grass length, which can prevent proper airflow. Clear any blockages in the grass chute from the blade area to the grass box. Avoid mowing wet grass, as it tends to clump.

Check for excessive build-up of grass clippings under the deck, which can create drag. Ensure the cutting height is not set too low. If the grass box is full, empty it to reduce weight. Mowing very thick or wet grass can also increase resistance.