VEVOR Camper Wheel Chock Stabilizer - 2 Sets

No, these are H-shaped stabilizers specifically designed for dual-axle setups where the unit can be placed between two adjacent tires.

Yes, you should always use standard wheel chocks to secure the vehicle for safety; the VEVOR stabilizer is intended for movement reduction only.

When tightened correctly, it exerts firm pressure against the tread. Avoid overtightening to prevent unnecessary stress on the rubber sidewalls.

Yes, each set of stabilizers comes with an integrated ratchet wrench for easy adjustment.

A typical installation takes approximately 5 minutes for both sets.

Yes, the electrostatic powder coating provides a durable barrier against moisture and environmental elements, though it is good practice to keep them clean.

Ensure the tires are free of mud or gravel. Verify that you have tightened the unit sufficiently with the ratchet until it seats firmly into the tread grooves.

Check the threaded rod for debris or lack of lubrication. Clean the threads and apply a small amount of automotive grease or silicone lubricant.

Verify that your tire spacing is within the 3.5-inch to 12-inch range and that the vehicle is parked on relatively level ground.