Best current price£3.65from eBay
Shopping.co.uk recommended and popular offers
eBay£3.65Visit shop Threaded Lifting Eye Bolt M6 (6MM Self Colour Dynamo Eyebolt 0.06 Ton)
Visit shop
B&Q£4.00Visit shop B&Q - M6 Threaded Dynamo Lifting Eyebolt (6mm Self Colour 0.06 Tonne)
Visit shop
Amazon£6.50Visit shop Threaded Lifting Eye Bolt M12 (Self Colour Dynamo Eyebolt 0.32T BS4278 Table 3)
Visit shop18 offers from £3.65 - £9.95
View price history by clicking the chart icon.
The SecureFix Direct M16 Dynamo Lifting Eyebolt is designed for professionals in the lifting industry who require a certified and robust lifting point. Its key benefit is a tested and certified Safe Working Load (SWL) of 0.63 Tonne, ensuring safety and compliance. A primary caveat is that it must only be used for straight lifts by a competent person, making it unsuitable for angled loads. This eyebolt offers a reliable solution for various lifting tasks, featuring a durable self-colour finish and precise M16 threading.
| Model Part Number | M16 |
|---|---|
| Brand | SecureFix Direct |
The Safe Working Load (SWL) for this M16 Dynamo Lifting Eyebolt is 0.63 Tonne.
No, this eyebolt must only be used for straight lifts. Angled lifting can cause it to fail.
A self-colour finish means the product has its natural metal appearance after manufacturing, with minimal or no added plating or coating for aesthetics or enhanced corrosion resistance.
The test certificate is included with the product and will be sent to you via email.
Key dimensions include TA=28.8MM, B=58.8MM, C=32.7MM, D=16MM (thread diameter), E=16.8MM, F=41.4MM, G=14.2MM, H=30MM, and a pitch of 2.00MM.
The product code is SFMDE16.
This M16 eyebolt weighs 0.26kg.
These eyebolts must only be used for straight lifts by a competent person.
Check that the mating thread is clean, undamaged, and the correct M16 size. Ensure the tapped hole is deep enough.
Ensure the mating surface is flat and the eyebolt is fully seated. Re-tighten carefully, ensuring not to over-torque if the mating material is soft.
Discontinue use immediately. Inspect for deep pitting or cracks. If significant, replace the eyebolt. Minor surface rust on a self-colour finish can sometimes be cleaned, but structural integrity must be confirmed.
Cease use. This eyebolt is rated and designed ONLY for straight vertical lifts. Using it for angled lifts can lead to failure and serious injury. Consult the product manual or manufacturer for suitable angled lifting hardware.
Setup: Ensure the M16 thread of the eyebolt is clean and free from debris. Screw the eyebolt into a properly tapped hole of the same M16 size. Hand-tighten first, then use a spanner on the flats (if applicable) to snug it up. Ensure it is fully seated and stable. Crucially, the eyebolt must only be used for straight lifts. Ensure the lifting device (e.g., shackle, hook) is correctly seated within the eye.
Compatibility: Compatible with any fixture or equipment designed to accept an M16 male thread. It is intended for use with lifting accessories rated for at least 0.63 Tonne and appropriate for straight lifts.
Care: Inspect the eyebolt before each use for any signs of wear, corrosion, or damage. Clean with a dry cloth. Avoid exposing the self-colour finish to harsh chemicals or highly corrosive environments, which may degrade its protective qualities over time. If significant corrosion is present, the eyebolt should be replaced.
