Farrow & Ball Dimpse Paint 2.5L - Grey

The main advantage is its extreme durability, washability, and resistance to scuffs and mould, making it ideal for high-traffic and high-moisture areas like kitchens and bathrooms.

A 2.5 litre tin covers up to 35m² on average, depending on the surface and application method.

No, this Modern Emulsion is specifically designed for interior walls and ceilings.

You can gently wipe the surface with a damp cloth. For tougher marks, use a mild detergent solution and rinse with clean water. Avoid abrasive cleaners.

The recoat time is typically 4 hours, but this can vary depending on temperature and humidity. Allow adequate drying time between coats.

No, Farrow & Ball Modern Emulsion is a water-based paint with low VOCs, meaning it has very little odour.

It is recommended to prepare gloss surfaces by lightly sanding them to create a key. For best adhesion, apply a coat of Farrow & Ball primer and undercoat before applying the emulsion.

Ensure the surface was properly prepared and primed. Stir the paint thoroughly before application and apply thin, even coats. Ensure you are not painting in draughty conditions or extreme temperatures.

Apply paint with a good quality synthetic brush or roller, working in a consistent direction. Ensure even pressure and avoid overworking the paint. Allow adequate drying time between coats.

Ensure the underlying cause of mould (e.g., poor ventilation, persistent damp) is addressed. Thoroughly clean any existing mould before painting. This paint has mould-resistant properties but cannot eliminate the source of mould.

Stir the paint thoroughly. If still too thick, a small amount of water (no more than 5% per litre) can be added, but this may slightly affect the finish. Ensure the paint is at room temperature.