Best current price£7.50from Norbreck bathrooms
Shopping.co.uk recommended and popular offers
Norbreck bathrooms£7.50Visit shop Norbreck Bathroom & Tile Centre Black Primaflow - Floplast Abs Solvent Weld Pipe 32Mm X 3M Ws01
Visit shop2 offers from £7.50 - £8.03
View price history by clicking the chart icon.
This 32mm black Solvent Weld Waste Pipe from FloPlast is designed for efficiently and safely conveying waste water from basins and bidets within your home or commercial plumbing systems. Its key benefit is providing a permanent, secure, and watertight connection through a simple solvent weld process. A caveat to be aware of is that these solvent weld joints are permanent and cannot be demounted once made, requiring careful assembly.
| Brand | FloPlast |
|---|
The 32mm diameter pipe is generally used for waste water from appliances such as washbasins and bidets.
Clean both surfaces, apply solvent cement to both pipe and fitting, push pipe fully in with a slight twist, hold for a few seconds, wipe excess, and allow 12 hours to set before testing.
No, solvent weld joints are permanent and cannot be demounted once the joint has been made.
Kitemark certification indicates that the product has been independently tested and certified to meet specific British Standards (BS EN 1455 in this case), ensuring quality and reliability.
Always work in a well-ventilated area, keep cement away from heat sources or flames, and avoid contact with skin. If contact occurs, wash thoroughly with soap and water.
The installation should be left for 12 hours before testing to ensure the joint has fully cured.
For kitchen sinks and dishwashers, a larger 40mm waste pipe is generally recommended due to the higher volume of waste water.
Ensure surfaces were clean and dry before applying solvent cement. Confirm correct amount of cement was used and the pipe was fully inserted. Allow adequate setting time (12 hours before testing).
Ensure pipe end is not deformed. Check for obstructions inside the fitting. Slightly re-apply solvent cement if it has started to dry.
Ensure the pipe was fully inserted before twisting. The twist action helps to spread the cement; if it feels loose, the surfaces may not have made full contact. Re-assembly may be necessary if the joint is not yet set.
Wash affected area thoroughly with soap and water immediately. Avoid contact with eyes. Ensure good ventilation during use.
Setup:
Compatibility:
Care:
