US PRO Tools Bolt Cutters - 8 inch

These bolt cutters are designed for cutting mild steel, bolts, non-ferrous metals, wire, and light chains. They are not intended for hardened steel or heavy-duty applications.

Keep the blades clean and dry after use. Lubricate the pivot point periodically with light oil and store the cutters in a dry environment to prevent rust.

The rubber grips are typically permanently attached for durability. If they become damaged, it may be difficult to replace them without specialized tools.

The center cut jaw placement significantly multiplies the leverage, allowing for more efficient cutting with less physical effort compared to other jaw types for the same material thickness.

These 8-inch bolt cutters are best suited for smaller diameters. Attempting to cut very thick metal rods may exceed the tool's capacity and could damage the blades.

The bolt cutters weigh approximately 0.617 pounds (around 0.28 kg).

No, these bolt cutters are ready for use straight out of the packaging. Just ensure they are clean and ready for your task.

Check the pivot point for debris or rust. Clean and lubricate the pivot with a light oil. Ensure the handles are aligned properly.

Inspect the blades for damage or dullness. Ensure you are using the cutters on appropriate materials within their specified capacity. Sharpen or replace blades if necessary.

Check the pivot bolt and nut. Tighten if necessary, ensuring the handles still pivot smoothly. If the handles themselves are damaged, replacement may be required.

Clean the rusted areas with a wire brush and apply a rust inhibitor or light oil. Store the tool in a dry place to prevent further rusting.