Best current price£5.99from eBay
Shopping.co.uk recommended and popular offers
eBay£5.99Visit shop Tamiya AS-21 Dark Green 2 (IJN) 100ml Spray Paint for Scale Models - AS86521
Visit shop
Amazon£11.14Visit shop TAMIYA 86515 AS-15 Light Brown Matt (TAN) (USAF) 100 ml - Spray Paint for Plastic Model Making, Especially for Aircraft Models, Model Making and Craft Accessories,75 Milliliters
Visit shop7 offers from £5.99 - £14.99
View price history by clicking the chart icon.
This Tamiya AS-5 Light Blue spray paint is ideal for modelers seeking authentic Luftwaffe colors for 1/32 and 1/48 scale aircraft. Its quick-drying, high-coverage formula ensures a realistic finish without obscuring fine details. A key caveat is the necessity of using a primer for optimal adhesion.
| Model Part Number | 86505 |
|---|---|
| Brand | Tamiya |
This paint is specifically formulated for 1/32 and 1/48 scale aircraft models.
Yes, Tamiya strongly recommends using a primer for optimal adhesion and a uniform finish. Using a primer will ensure the best results.
Tamiya AS sprays are quick-drying. Typically, the surface will be touch-dry within minutes, but it's advisable to wait at least 30 minutes to an hour before handling or masking, depending on environmental conditions.
Tamiya AS spray paints are formulated for direct spray can application. They are not designed to be thinned and used in an airbrush. For airbrushing, Tamiya offers equivalent colors in their LP (Lacquer Paint) or TS (Synthetic Enamel Spray) lines which can be thinned.
The paint provides a durable, realistic-looking finish with high coverage that preserves fine model details.
To prevent clogging, invert the can after use and spray for a few seconds until only clear propellant emerges. This clears any residual paint from the nozzle.
Each can contains 100ml of synthetic lacquer paint.
Ensure the can is shaken thoroughly. The nozzle may be partially clogged; try clearing it by inverting the can and spraying briefly. If persistent, try a new can or soak the nozzle in lacquer thinner (use caution).
Ensure consistent application distance and speed. Variations in humidity or temperature can affect the final sheen. For specific sheens, consider using Tamiya’s clear coats (e.g., TS-14 Gloss Black or TS-80 Flat Clear) after the base color has fully cured.
The surface may not have been properly primed or cleaned. Re-clean the surface, apply a fresh coat of primer, and allow it to cure fully before re-applying the paint.
The spray distance was likely too close, or the application was too heavy. Allow the affected area to dry, then gently sand it smooth and re-apply in several thin, light coats from the recommended distance.
Setup: Ensure the model or parts to be painted are clean, free of dust and grease. Apply a thin, even coat of primer, such as Tamiya Primer Spray (e.g., AS-1 or AS-2), and allow it to dry completely according to the primer's instructions. Shake the AS-5 can vigorously for at least one minute after the mixing ball rattles freely. Test spray on a scrap piece before application.
Compatibility: Tamiya AS sprays are synthetic lacquer-based paints. They are designed to be compatible with most plastic model kits and Tamiya primers. Avoid using aggressive solvents not intended for model paints, as they may damage the plastic or underlying paint layers. For airbrushing, consider Tamiya’s range of lacquer paints (LP series) which can be thinned appropriately, as AS spray cans are not designed for airbrush conversion.
Care: Store cans in a cool, dry place away from direct sunlight and heat sources. After use, invert the can and spray for a few seconds to clear the nozzle and prevent clogging. Clean any accidental spills immediately with a suitable solvent (e.g., Tamiya Lacquer Thinner X-20).
