Philips Série 7000 Steam Generator Iron - PSG7300/20

The iron will indicate when descaling is needed via an indicator light. This is typically required after a certain number of ironing hours, depending on water hardness in your area. Always follow the Easy De-Calc instructions when prompted.

Yes, you can use tap water. However, if you live in an area with hard water, using demineralized water is recommended to extend the life of your appliance and maintain optimal steam performance.

OptimalTEMP technology ensures that the soleplate temperature is perfectly controlled, so you will never burn ironable fabrics, regardless of the steam setting. You can safely leave the hot iron resting on your ironing board or clothes without causing damage.

The Philips PerfectCare Steam Generator 7000 Series heats up very quickly, typically in just 2 minutes.

ECO Mode reduces energy consumption by 50% compared to the maximum steam setting, without compromising on great results for most garments. It's ideal for lighter fabrics or less intense ironing needs.

Yes, the iron is lightweight and designed for vertical steaming, allowing you to refresh hanging garments, curtains, or upholstery quickly and effectively.

The auto shut-off feature turns off the iron automatically if it is left stationary for a period of time (usually a few minutes). This is a safety feature to prevent accidents and save energy.

The Philips PerfectCare Steam Generator 7000 Series comes with a 2-year warranty period.

Ensure the water tank is filled and the iron is properly locked onto the base. Check that the steam generator has reached its operating temperature. Ensure the steam trigger is pressed.

Allow the iron to heat up fully. If the issue persists, the iron may require descaling. Empty and clean the Easy De-Calc system.

Check that the power cord is securely plugged into a working outlet. Ensure the auto shut-off has not been activated; if so, move the iron to restart.

Follow the Easy De-Calc procedure to remove limescale. Refer to the 'Care' section for detailed instructions.

Ensure the SteamGlide Elite soleplate is clean. Remove any residue with a damp cloth. If deep scratches are present, contact customer support.