Norton Sanding Roll - 80 Grit - 5m x 115mm
Best current price£19.04from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£19.04Visit shop B&Q - 80 Grit Brown Sanding Roll (L)5M (W)115mm
Visit shopB&Q£19.04Visit shop One Offer
1 offer from £19.04
View price history by clicking the chart icon.
Product Information
Full details
This Norton Sanding Roll is for woodworkers and DIY enthusiasts needing a versatile sanding solution for wood surfaces. Its key benefit is the convenient 5-meter length and 115mm width, allowing for custom sizing for hand or power tool use, though its 80-grit coarseness is best suited for initial stock removal or shaping rather than fine finishing.
All features
| Brand | Norton |
|---|
Extended Product Information
FAQs
What is the best use for 80-grit sandpaper?
80-grit sandpaper is considered a coarse grit, best for heavy-duty sanding tasks like shaping wood, removing old paint or finishes, and smoothing very rough surfaces. It is generally not suitable for final finishing.
Can I use this sandpaper on metal or plastic?
While it might remove material from other surfaces, this sandpaper is specifically designed and optimized for use on wood. Using it on other materials may yield poor results or damage the sandpaper.
How do I cut the sandpaper roll?
You can use sharp scissors or a utility knife to cut the sandpaper to the desired length and width.
How long will a 5m roll last?
The lifespan of the roll depends heavily on the type of wood being sanded, the amount of material to be removed, and how frequently it is used. For moderate use on typical woodworking projects, it should provide a good amount of sanding material.
Is this sandpaper suitable for fine finishing?
No, 80-grit is a coarse grit and is not suitable for fine finishing. You would need to progress to much finer grits (e.g., 120, 180, 220, and higher) for a smooth, finished surface.
Can I use this with a random orbital sander?
Yes, you can cut pieces from the roll to fit your random orbital sander's pad, provided your sander uses hook-and-loop or clamp-style paper that can accommodate custom-cut sheets.
Troubleshooting
Sandpaper not adhering to power sander
Ensure the sandpaper is cut to the correct size for your sander's pad and that the clamping mechanism is functioning properly.
Rapid dulling of sandpaper
The surface being sanded may be too aggressive or contain contaminants. Clean the surface and the sandpaper frequently. Consider if a coarser grit is needed for the initial pass.
Tearing during use
Apply less pressure or ensure the sandpaper is securely attached to the sanding block or power tool. Check for any sharp edges on the workpiece.
Pros and Cons
Pros
- Highly versatile for various sanding applications on wood.
- Customizable length and width to fit specific project requirements.
- Generous 5-meter roll ensures long-lasting use.
- Suitable for both manual and power tool sanding methods.
Cons
- 80 grit is too coarse for final finishing stages.
- May require frequent replacement of sandpaper if used on very rough surfaces.
- Can generate dust, requiring appropriate safety precautions.
Setup, Compatibility & Care
Setup:
- Unroll the desired length of sandpaper from the 5m roll.
- Cut the sandpaper to the required size using sharp scissors or a utility knife.
- For hand sanding, attach the sandpaper to a sanding block, ensuring it is held firmly.
- For power sanders, check compatibility with your tool's sandpaper attachment system and secure the cut piece as per your tool's instructions.
Compatibility:
- Primarily designed for use on wood.
- Compatible with standard sanding blocks.
- Can be adapted for use with various orbital, sheet, or detail sanders, provided the sandpaper can be cut to fit.
Care:
- Store the roll in a dry place to prevent moisture damage.
- Keep the sandpaper clean during use by tapping off dust buildup or using a sandpaper cleaning stick if available.
- Discard worn-out sandpaper to maintain optimal performance.