MAM Feel Good Glass Bottle - 90ml - Extra Slow Flow

Yes, the extra-slow flow teat is designed to mimic the natural pace of breastfeeding, making it an excellent choice for breastfed babies who are also bottle-fed, helping to reduce teat confusion.

It is recommended to sterilise all bottle components before the first use and after every single use to maintain optimal hygiene for your baby's health.

Yes, glass is resistant to temperature changes. You can safely put warm or hot liquids into the bottle. However, always ensure the liquid is at a safe feeding temperature for your baby before offering it.

Glass bottles are naturally BPS/BPA-free, resist scratches, odours, and stains, and are easy to clean. They maintain a pure taste for milk and are generally more durable in terms of longevity, though they can break if dropped.

No, the anti-colic design relies on the base vent system. For optimal performance in reducing colic and to ensure a proper seal, all components, including the base, must be assembled correctly.

The 3-minute sterilisation time is based on 500-1000W. If your microwave has a lower wattage, you might need to increase the sterilisation time slightly (e.g., 4-5 minutes for lower wattage). Always ensure enough steam is generated and that components are thoroughly sterilised. Higher wattage microwaves might require slightly less time.

Ensure all parts, especially the silicone base vent and the screw ring with the teat, are correctly assembled and tightened securely. Check that the teat is properly seated within the screw ring and not pinched. Verify the base is firmly attached to the glass bottle.

Confirm that exactly 20ml of cold water was used in the base. Verify your microwave's wattage and ensure the bottle was microwaved for the full 3 minutes. Allow the bottle to cool down and dry completely after sterilisation; some condensation is normal.

First, check the teat for any blockages or damage. Ensure the anti-colic base is clean. If your baby is consistently taking a very long time or getting frustrated, they might be ready for a slightly faster flow teat. MAM offers various flow rates (e.g., slow, medium, fast) that can be purchased separately and are compatible with this bottle. Consult with a pediatrician or lactation consultant if concerns persist.