Best current price£34.04from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£34.04Visit shop Schneider Electric Light Xb4bvb4ex Atex Led Pilot 24V - Xb4bvb4ex
Visit shop1 offer from £34.04
View price history by clicking the chart icon.
The Schneider Electric Harmony XB4, Panel Mount Red LED Pilot Light (XB4BVB4EX) is designed for operators in hazardous environments, offering clear visual status indication for machinery. Its key benefit is robust ATEX certification and high IP ratings, ensuring reliable operation in dusty or potentially explosive areas like oil, gas, and food processing. A potential caveat is the need for a separate power supply as it operates at 24V AC/DC, requiring careful integration into existing control systems.
| Model Part Number | XB4BVB4EX |
|---|---|
| Brand | Schneider Electric |
ATEX certification indicates that the pilot light has been manufactured and tested to meet strict European Union standards for equipment used in potentially explosive atmospheres, specifically designed for dust zones 21-22 in this case.
The XB4BVB4EX is certified for dust zones 21-22. For other hazardous area classifications (gas groups), consult the ATEX directives and product documentation for suitability.
The pilot light can operate reliably within a wide temperature range of -40°C to 70°C.
No, this is a pilot light unit requiring an external 24V AC/DC power supply. The LED light block is integral to the unit.
The LED is integrated into the pilot light unit. If the LED fails, the entire pilot light assembly typically needs to be replaced.
IP65 means the unit is protected against dust ingress and low-pressure water jets. IP67 means it is protected against dust and can withstand immersion in water up to 1 meter for 30 minutes.
Please refer to the Schneider Electric warranty documentation for specific warranty terms and duration, as this can vary.
Verify that the power supply is connected correctly to the 24V AC/DC terminals and that the voltage is within the specified range. Check for loose connections at the screw terminals.
Ensure the voltage supply is stable and correct. Check the security of the terminal connections. If the issue persists, the LED module may need replacement.
Inspect the seals and mounting of the pilot light. Ensure it is securely mounted and that no damage has occurred to the housing or lens. Clean the exterior as per care instructions. If damage is present, replace the unit.
Setup: This pilot light requires a standard 22mm diameter hole in the control panel. Mount the unit by inserting it into the cutout and securing it from behind using the provided mounting hardware. Connect the 24V AC/DC power supply to the screw terminals, ensuring correct polarity if applicable. Ensure all connections are tight to maintain the integrity of the enclosure.
Compatibility: The XB4BVB4EX is designed for use with 24V AC/DC power sources. It is compatible with control systems requiring visual status indication in hazardous environments. Ensure your control panel design adheres to ATEX directives for installation in Zone 21/22 areas.
Care: To maintain performance and safety, regularly inspect the pilot light for any signs of physical damage. Clean the exterior with a soft, damp cloth. Avoid using abrasive cleaners or solvents, which could damage the metal housing or compromise the sealing. Ensure the terminal connections remain clean and secure.
