Plumbsure Brass Compression Equal Tee - 15mm X 15mm X 15mm

Name: Plumbsure Brass Compression Equal Tee - 15mm X 15mm X 15mm
Brand: Plumbsure
SKU: msw5bzahea
Price: 4.16 GBP
Availability: InStock

Brass has long been used as a plumbing solution for both domestic and industrial use. The material...

Best current price£4.16from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

B&Q£4.16Visit shop

B&Q - Brass Compression Equal Tee (Dia) 15mm X 15mm X 15mm

Visit shop

One Offer

1 offer from £4.16

View price history by clicking the chart icon.

B&QB&Q - Brass Compression Equal Tee (Dia) 15mm X 15mm X 15mm

Free delivery in 1–3 days

£4.16

Visit shop

Product Information

Full details

This guide is for plumbers and DIY enthusiasts working with domestic or industrial plumbing systems. The Plumbsure Brass Compression Equal Tee offers a durable and effective solution for creating three-way connections in copper pipework, ensuring reliable water flow. A potential consideration is ensuring proper tightening to prevent leaks, as with any compression fitting.

All features

Brand	Plumbsure

Extended Product Information

FAQs

Do I need to solder this fitting?

No, this is a compression fitting and does not require soldering. It uses a compression olive and nut to create a watertight seal.

What type of pipe can I use with this tee?

This fitting is designed for use with standard 15mm copper pipe.

How do I know if I've tightened the nut enough?

Tighten past hand-tight with wrenches, typically 1-2 full turns. Listen for a slight 'give' and avoid excessive force. Refer to specific installation guides for precise torque if available.

Can this fitting be used for gas lines?

This fitting is intended for water systems only and should not be used for gas lines.

What is the maximum temperature and pressure this fitting can handle?

Compression fittings are generally suitable for typical domestic hot and cold water pressures and temperatures. For specific high-pressure or high-temperature industrial applications, consult the manufacturer's detailed specifications.

How many connections does this fitting provide?

This is an equal tee fitting, providing three connections of 15mm diameter each.

Troubleshooting

Leak at the connection

Check that the compression nut is adequately tightened. Ensure the pipe is fully inserted and the olive is correctly seated. If the leak persists, the olive or pipe end may be damaged; consider replacing the olive and re-making the joint.

Difficulty tightening nut

Ensure the threads on the fitting and nut are clean and free from debris. If the nut is cross-threaded, unscrew it carefully and re-attempt threading.

Fitting does not seal properly

Verify that the correct size olive is used for the 15mm pipe. Ensure the pipe surface is smooth and round where the olive seals. If the pipe is significantly out of round, it may need to be re-formed.

Pros and Cons

Pros

Corrosion-resistant brass ensures long service life.
No-soldering required, simplifying installation.
Provides a strong, reliable watertight connection.
Suitable for a wide range of plumbing projects.
Cost-effective compared to some other connection methods.

Cons

Requires careful tightening to avoid overtightening or under-tightening.
May not be suitable for extremely high-pressure applications without additional support.
Can be bulkier than soldered fittings in tight spaces.
Brass can be susceptible to dezincification in aggressive water conditions.

Setup, Compatibility & Care

Setup:

Ensure the pipe ends are clean, dry, and free from any debris or burrs. Use a pipe cutter for a clean, square cut.
Slide a compression nut onto the pipe, followed by a compression olive (or ring).
Insert the pipe fully into the appropriate port of the tee fitting.
Slide the olive up to the fitting and ensure it sits snugly against the end.
Screw the compression nut onto the fitting, hand-tightening first.
Using two wrenches, tighten the compression nut. Typically, one wrench holds the fitting body steady while the other tightens the nut. Tighten approximately 1-2 full turns past hand-tight, or follow manufacturer torque specifications if available. *Avoid overtightening*, which can damage the olive or pipe.

Compatibility:

Compatible with standard 15mm copper pipe.
Suitable for use with cold and hot water systems.
Ensure the application's pressure and temperature ratings are within the fitting's capabilities.

Care:

Brass fittings require minimal care. Periodically check for any signs of leakage, especially after initial installation or if the system experiences significant pressure changes.
If external cleaning is needed, use a damp cloth. Avoid abrasive cleaners that could damage the brass finish.