Grandeco Telma Wallpaper - Green

Use a wallpaper paste specifically designed for vinyl wallpapers. These are readily available at most hardware stores.

Measure the height and width of the walls you plan to cover. Calculate the total wall area and then divide by the coverage area of a single roll, remembering to account for pattern matching and waste.

While the vinyl material is moisture-resistant, it's best to ensure the bathroom is well-ventilated to prevent moisture buildup. Make sure the walls are properly sealed.

Use a wallpaper stripper solution, following the product instructions. Score the surface of the wallpaper to allow the solution to penetrate and loosen the adhesive. You might also try steaming the wallpaper.

Reverse hang means alternating the direction of the wallpaper strips during application. This helps to minimize waste and ensure a perfect match, especially with textured or patterned wallpapers.

Always check the batch numbers on your rolls to ensure they are the same. If the colors do not match, contact the retailer immediately.

Use a smoothing tool to gently push the air bubbles out towards the edges of the wallpaper. For larger bubbles, carefully cut a small slit and smooth the paper back down.

Ensure that the edges are perfectly aligned during application. Use a seam roller to gently press the seams together. If seams are still visible, consider a seam adhesive for better adhesion.

Make sure you are using the correct type of wallpaper paste suitable for vinyl wallpaper and that the walls are properly prepared. Check the paste instructions and ensure the correct amount has been applied to the wall.