FXLab Battery Powered LED Mirror Ball Motor With Sound To Light Function

The motor can support mirror balls weighing up to 180Kg.

It is designed for mirror balls with a diameter of up to 200cm (2 meters).

Yes, the motor features Stand Alone and Master/Slave modes, which can be accessed and configured via the built-in dip switches without a DMX controller.

Operating modes are selected using the integrated dip switches located on the motor unit. Refer to the product manual for specific dip switch configurations for each mode.

This motor is designed for professional installation environments, typically indoors. It is not rated for outdoor use and should be protected from moisture and extreme temperatures.

The motor uses standard XLR connectors for DMX input and output.

The product description does not specify bi-directional rotation. Typically, DMX-controlled motors allow for direction changes via the controller.

Verify power connection. Ensure the motor is correctly set to DMX, Stand Alone, or Master mode using the dip switches. If using DMX, check DMX cable connections and ensure a DMX signal is being sent.

Check that the mirror ball is balanced and securely attached. Ensure the mounting structure is stable and free from vibrations. Inspect for any obstructions around the motor or mirror ball.

Confirm DMX cables are correctly connected (In/Out). Ensure the motor's DMX address is set correctly via dip switches and matches the controller's settings. Test with a different DMX controller or cables.

Check for foreign objects near the motor. Ensure the mirror ball is not hitting any surfaces. If the noise persists, it may indicate an internal issue requiring professional servicing.