Keter Newton Plus Shed - Grey

The external assembled dimensions are 230 x 287 x 246cm (height x width x depth). The internal dimensions are 201 x 261 x 234cm (height x width x depth). The entry width through the double doors is 138.8cm.

Yes, a firm and perfectly level foundation is essential for the structural integrity of the shed, proper door alignment, and to prevent moisture issues. Concrete, paving slabs, or a solid timber base are suitable options.

No, the Evotech panels are designed to be maintenance-free and do not require painting. They mimic the look of wood without the need for additional treatments. Painting could void the warranty and may not adhere properly.

Assembly time varies depending on experience, but it typically requires two people and several hours. Always refer to the provided instruction manual for detailed steps and estimated times.

The Keter Newton Plus Shed is designed to be highly weather-resistant and protect contents from rain and snow. Proper assembly according to the instructions is crucial to ensure all seals and panels are correctly installed for optimal water resistance.

While the shed does not come with integrated shelving, its sturdy double-wall construction generally allows for the installation of user-provided shelving units. It's recommended to use appropriate fixings designed for plastic or composite materials and to avoid overloading the shelves.

The shed is built to withstand a significant snow load, with a capacity of 150kg/m2. This indicates its robust design for various weather conditions.

The most common cause is an uneven foundation. Re-check that your base is perfectly level. Ensure all wall panels are correctly seated and all screws are fully tightened according to the assembly manual. Minor adjustments to door hinges may be possible after ensuring a level base.

Verify that the shed is assembled correctly, paying close attention to roof panel overlaps and sealants (if provided) as per the manual. Also, ensure the base extends slightly beyond the shed perimeter to prevent water from running back underneath. Check that the ground around the shed slopes away from it.

Confirm that the built-in ventilation openings are clear and unobstructed. Avoid stacking items directly against the inner walls to allow air circulation. Ensure any items placed inside the shed are dry. For persistent dampness, consider adding a moisture absorber.