UGREEN NASync DX480T Plus - 4 Bay

The NAS supports M.2 NVMe SSDs. The user must install the drives.

The NAS supports RAID levels 0, 1, 5, 6, and 10.

No, the UGREEN NASync DX480T Plus is a diskless enclosure. You need to purchase and install your own M.2 NVMe SSDs.

You can access the NAS interface through a web browser using the NAS's IP address. The default setup process will provide the access information.

The warranty period for the UGREEN NASync DX480T Plus is 3 years.

Yes, you can expand the storage capacity by adding larger capacity M.2 NVMe SSDs or by using different RAID configurations. Refer to the manual for instructions.

Yes, the NAS supports remote access, allowing you to access your files from anywhere with an internet connection. Refer to the user guide for configuration details.

Check the power adapter connection and ensure it is securely plugged into both the NAS and a working power outlet. If the issue persists, try a different power outlet.

Verify the Ethernet cable is securely connected. Ensure that the network switch or router supports the 10GbE speed. Also, check the NAS and network device for any firmware updates that could improve performance.

Verify the network settings, including the IP address and subnet mask. Ensure that the firewall on your computer or router is not blocking access to the NAS. Restart the NAS and your network devices.

Check the type of SSDs installed. Ensure that the drives are compatible with the NAS and support the expected read/write speeds. Test the network connection speed to the NAS.

Check the NAS management interface for any error messages related to the RAID configuration. Ensure all drives are properly installed and functioning. Review the RAID configuration settings and make necessary adjustments.