Floorsaver Floor Etcher - 5L
Best current price£29.00from Homebase
Best offers
Shopping.co.uk recommended and popular offers
Homebase£29.00Visit shop Floorsaver Floor Etcher 5L
Visit shopHomebase£29.00Visit shop One Offer
1 offer from £29.00
View price history by clicking the chart icon.
Product Information
Full details
The Floorsaver Floor Etcher is a high-performance surface preparation solution designed for professionals and DIY enthusiasts looking to ensure long-lasting results for their concrete, brick, or masonry coatings. By leveraging a potent hydrochloric acid formula enhanced with detergents, it removes deep-seated grime and opens the surface pores to guarantee superior paint adhesion. While it is highly effective at neutralizing alkalinity and cleaning bare concrete, users must handle the product with caution, as it is a strong chemical agent requiring strict adherence to safety protocols during application.
All features
| Brand | Floorsaver |
|---|
Extended Product Information
FAQs
Can I use this on a floor that was already painted?
No. The etcher is designed for bare concrete and masonry. You must mechanically remove existing paint before using this product.
Does this product work on garage floors with oil stains?
While the detergents help, heavy oil stains should be degreased with a dedicated degreaser before applying the etcher for the best results.
How long do I need to wait before painting?
You must wait until the concrete is completely dry. Depending on humidity and ventilation, this usually takes 24 to 48 hours.
Is it safe for pets?
No. Keep pets and children away from the area until the surface has been thoroughly rinsed and is completely dry.
Do I need to dilute the product?
Yes, always check the label for the specific dilution ratios recommended for your surface type.
Troubleshooting
The floor does not look 'etched' after application.
Ensure the floor was not already sealed. The etcher only works on porous, unsealed surfaces; if the acid does not fizz, there is likely a barrier on the concrete.
White residue remains after drying.
This is likely dried acid or detergent residue. Thoroughly scrub the area with fresh water and rinse again until the surface is completely clean.
Pros and Cons
Pros
- Significantly improves bond strength for floor paints and sealants
- Removes stubborn surface contaminants that standard cleaning misses
- Neutralizes alkalinity to prevent common coating failures
- Works effectively on both indoor and outdoor concrete surfaces
Cons
- Requires careful handling due to the strong acid composition
- Involves a multi-step process including thorough rinsing
- Not suitable for use on surfaces already treated with existing sealers or paints
Setup, Compatibility & Care
Before application, ensure the area is well-ventilated, especially if working indoors. Always wear protective gloves, safety goggles, and sturdy boots, as the formula is caustic. The product is compatible with bare concrete, porous brick, and unsealed masonry. Do not use this product on polished concrete, pre-sealed floors, or surfaces that have been previously painted, as it will not be able to penetrate the surface. After use, store the container in a cool, dry place, ensuring the cap is tightly sealed and kept out of reach of children. Any equipment used during application, such as brushes or rollers, should be rinsed thoroughly with water immediately after the job is finished.