Best current price£9.73from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.73Visit shop B&Q - PolyvineMulti Surface LacquerDead Flat100Ml
Visit shop
eBay£15.64Visit shop POLYVINE CRYSTAL CLEAR LACQUER GLOSS 500ML
Visit shop15 offers from £9.73 - £121.94
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals seeking a durable, clear protective finish for various interior surfaces. The Polyvine Multi Surface Lacquer provides a crystal-clear, hard-wearing barrier that resists water, stains, and heat, ideal for protecting painted, wood, tile, metal, laminate, ceramic, glass, and plastic surfaces. A key benefit is its fast drying time and excellent sanding properties for efficient project completion. One caveat to consider is that it is intended for interior use only.
| Model Part Number | VLF0100 |
|---|---|
| Brand | Polyvine |
No, the Polyvine Multi Surface Lacquer is designed for interior use only.
It is available in dead flat, satin, and gloss finishes.
The lacquer dries in 1-2 hours. It can be recoated after 2 hours.
The coverage is approximately 15-20 square metres per litre.
Yes, it provides a water and stain-resistant finish suitable for interior surfaces like laminate countertops.
Clean with a soft, damp cloth. Avoid abrasive cleaners.
The product is designed to be crystal-clear. However, like many lacquers, prolonged exposure to direct UV light could potentially cause discoloration on certain substrates over extended periods. Testing on an inconspicuous area is recommended.
Ensure the surface was thoroughly cleaned and degreased before application. Lightly abrade glossy or smooth surfaces prior to application.
Apply thin, even coats rather than one thick coat. Ensure consistent brush or spray technique. Stir the lacquer thoroughly before and during application.
Ensure application in a well-ventilated area with appropriate temperature and humidity. Excessive humidity or cold temperatures can slow drying. Ensure coats are not applied too thickly.
Ensure the lacquer is fully cured before sanding. Use fine-grit sandpaper and sand lightly. If it's clumping, the lacquer may not be fully dry.
Setup: Ensure the surface to be lacquered is clean, dry, and free from dust, grease, and contaminants. Lightly sand surfaces like old paint or laminate to improve adhesion. For very smooth surfaces like glass or glossy paint, a primer might be beneficial, though not explicitly required by the product description. Apply in a well-ventilated area.
Compatibility: Suitable for interior wood, paint, tile, metal surfaces, laminate, ceramic, glass, and plastics. Always test on an inconspicuous area first, especially on plastics and laminates, to ensure compatibility and desired finish.
Care: Clean applied surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the lacquer finish. For spills, wipe them up promptly. The lacquer is water and stain resistant, but prolonged exposure to liquids should be avoided.
