Setup, Compatibility & Care
Setup
- Placement: Ensure the pump is installed in a positive head gravity-fed system, with the cold water cistern at least one meter above the pump.
- Connections: Connect the G 3/4 threaded connection to the pump and the 22mm to pipework using the provided flexible hoses.
- Electrical: The pump is pre-wired with a 1.5m power cable. Connect to a suitable power supply.
- Isolation Valves: Open the built-in isolating valves after installation.
Compatibility
This pump is specifically designed for use in positive head gravity-fed systems. It is not suitable for negative head or mains-fed systems.
Care
- Regularly check for any leaks or unusual noises.
- Inspect and clean the filters periodically to prevent blockages, ensuring optimal performance.
- The pump does not require frequent maintenance, but an annual check by a qualified plumber is recommended.