Best current price£12.01from eBay
Shopping.co.uk recommended and popular offers
eBay£12.01Visit shop TREND PRO 2/0X1/4TC 2/0 1MM TCT STRAIGHT ROUTER CUTTER BIT 1/4"" SHANK
Visit shop6 offers from £12.01 - £999.00
View price history by clicking the chart icon.
This Trend router cutter bit is designed for professionals prioritizing speed in their routing tasks. Its 1mm cut diameter and single flute design enable fast, free cutting. A key benefit is its tungsten carbide tipping for enhanced durability. However, its small diameter requires careful handling to prevent breakage and limits the depth of cut per pass.
| Model Part Number | 2/0X1/4TC |
|---|---|
| Brand | Trend |
For cutters with a 2.0mm diameter and below, including this 1mm diameter bit, the maximum depth of cut per pass should be 1.0mm.
No, single flute cutters like this one should not be used in eccentric chucks. Always ensure your chuck is compatible and secure.
A single flute design allows for faster cutting speeds and better chip clearance, which helps prevent the bit from clogging and overheating.
Small diameter bits are more susceptible to breakage due to their delicate nature. Applying excessive force, taking too deep a cut, or using improper techniques can easily snap them.
Tungsten carbide is an extremely hard material, making the tip highly resistant to wear and abrasion. This significantly extends the tool's lifespan compared to standard steel bits.
After use, clean the bit with a soft brush or compressed air to remove debris. Store it in a dry location to prevent rust and damage.
Ensure you are not exceeding the recommended depth of cut (1.0mm per pass for this diameter). Verify the bit is correctly seated in the collet and the collet is tightened properly. Check that the bit is not being used in an incompatible chuck type.
Clean the bit thoroughly to remove any build-up. Ensure you are using appropriate feed rates and that the material being cut is suitable for this type of bit. Check for any dulling or damage to the carbide tip.
This can be caused by excessive depth of cut, incorrect feed rate, or a loose bit. Ensure the bit is fully inserted and the collet is tight. Reduce the depth of cut per pass. Ensure the router itself is in good working order.
Setup: Ensure the router collet is clean and compatible with a 1/4" shank. Insert the router bit shank fully into the collet. Tighten the collet securely using the appropriate wrench, ensuring the bit is firmly seated.
Compatibility: This bit is designed for use with standard routers featuring a 1/4" collet. Crucially, do not use this single flute cutter in an eccentric chuck, as this can lead to instability and breakage.
Care: After use, clean the bit thoroughly to remove any dust or debris. A soft brush or compressed air is recommended. Store the bit in a dry place, ideally in its original packaging or a bit case, to prevent damage and corrosion. Inspect the tungsten carbide tip regularly for any signs of wear or chipping before each use.
