Best current price£26.24from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£26.24Visit shop Finder 39.81.0.024.0060 Solid State Relay Module 6A SPDT 24VAC/DC
Visit shop5 offers from £26.24 - £40.06
View price history by clicking the chart icon.
This Finder 39 Series Interface Relay Module is designed for electricians and automation engineers needing precise control and reliable switching in industrial applications. Its key benefit is its multifunctionality with 8 time functions and 8 time ranges, offering flexibility in complex timing sequences. A potential caveat is the need for the user to acquire and install a separate microfuse for certain configurations.
| Series | 39 Series |
|---|---|
| Model Part Number | 39.81.0.024.0060 |
| Brand | Finder |
The coil operates with 24V ac/dc, with a minimum input voltage of 19.2V ac/dc and a maximum input voltage of 26.4V ac/dc.
Time functions and ranges are selected using the DIP switches located on the module. There are 8 time functions and 4 time ranges available, up to 6 hours.
If you are using the optional output fuse module for protection, you must acquire and install a compatible microfuse (5 x 20 mm) yourself. The fuse is not included with the module.
This module features Single Pole Double Throw (SPDT) contacts.
The switching voltage for the contacts is between 250-400V ac.
The module dimensions are approximately 6.2mm in length, 90.7mm in depth, and 94.3mm in height.
Yes, terminals A1 or A2 and 15 can be bridged for specific wiring configurations as indicated in the technical documentation.
Verify that the coil voltage (24V ac/dc) is correctly applied to terminals A1/A2 and is within the operating range (19.2V - 26.4V ac/dc). Check DIP switch settings for intended function.
Ensure the DIP switches are set correctly for the desired time function and range. Use the fine-tuning adjustment for precise timing if needed. Check for environmental factors like temperature fluctuations.
Confirm power supply to the coil. If power is present and the LED is still off, the module may require replacement.
Check if the load voltage is within the specified switching voltage limits (250-400V ac). Ensure the coil is energized and the relay is receiving the correct control signal.
Setup: The module is designed for DIN rail mounting. Connect the power supply to the appropriate coil terminals (A1/A2) and the control signals to the input terminals. Terminals A1 or A2 and 15 can be bridged for specific configurations. If using the optional output fuse module, ensure a compatible microfuse (5 x 20 mm) is correctly installed in the designated slot. Settings for the time functions and ranges are adjusted using the DIP switches on the module.
Compatibility: This module is compatible with control systems providing a 24V ac/dc power supply within the specified input voltage range (19.2V to 26.4V ac/dc). The SPDT contacts are suitable for switching loads up to 250-400V ac. Ensure the ambient operating temperature remains within the -20°C to +50°C range for optimal performance.
Care: Keep the module clean and free from dust and moisture. Ensure proper ventilation around the module, especially when installed in a control panel. Periodically check all connections for tightness. Inspect the fuse (if installed) through the visible window for any signs of failure.
