eSkde Chainsaw - 26cc - 10"

The chainsaw uses a mixture of gasoline and 2-stroke engine oil. The fuel mixing ratio is provided in the user manual.

Sharpen the chain regularly, as needed, depending on the frequency and type of use. The chain may need sharpening after every use.

Loosen the bar nuts, adjust the chain tensioning screw, and tighten the bar nuts, as described in the user manual. Ensure the chain moves freely around the bar.

Always wear safety glasses, gloves, ear protection, and sturdy boots when operating the chainsaw.

Clean the chainsaw, drain the fuel, and store it in a dry and secure place away from flammable materials. Cover the bar to protect the chain.

The eSkde Chainsaw comes with a full manufacturer backing.

Replacement parts are commonly available from various retailers and online stores that sell chainsaw accessories.

Check the fuel tank for fuel and ensure the fuel mixture is correct. Verify the spark plug connection and condition. Check the choke and starting procedure.

Tighten the chain using the chain tensioning mechanism. Adjust the tension until the chain sits snug around the bar but can still be moved by hand.

Check the chain for sharpness and damage. Sharpen or replace the chain as needed. Ensure the chain is installed in the correct direction.

Check the fuel filter for blockages and clean or replace it. Inspect the spark plug for fouling. Adjust the carburetor settings if necessary, following the manufacturer's instructions.