Best current price£95.00from RS Components Ltd- UK
Shopping.co.uk recommended and popular offers
RS Components Ltd- UK£95.00Visit shop Siemens - PLC Expansion Module for use with S7-1200 Series, 62 x 38 x 21 mm, Analogue, 10 V dc
Visit shop7 offers from £95.00 - £286.92
View price history by clicking the chart icon.
This Siemens analogue output PLC expansion module is designed for users of the SIMATIC S7-1200 series seeking to extend their CPU's capabilities with analogue signal processing. Its key benefit is the reliable conversion of digital signals to analogue outputs, enabling more precise process control. A potential caveat for some applications might be its fixed analogue output specifications.
| Brand | Siemens |
|---|
This module converts digital signals from a Siemens S7-1200 CPU into analogue output signals (25mA, 10V DC) for process control applications.
It is specifically designed for the Siemens SIMATIC S7-1200 series.
The module is powered through its connection to the S7-1200 CPU.
The maximum operating temperature is +60°C.
No, this module is an analogue *output* module only. It converts digital signals to analogue outputs.
The module has a low power loss of 1.5 watts.
The dimensions are 62 mm x 38 mm x 21 mm.
Ensure the module is securely seated in its designated slot on the S7-1200 CPU. Verify that the CPU is powered on and functioning correctly. Check the module's LED status indicators for any error lights.
Confirm that the digital signal being sent from the CPU is within the expected range for conversion. Verify the wiring connections from the module to the output device. Consult the S7-1200 programming software to check the output configuration and scaling.
Refer to the Siemens S7-1200 documentation for specific LED error codes. Common causes include incorrect installation, communication errors with the CPU, or exceeding operating temperature limits.
Setup: The Siemens 6ES7232-4ha30-0xb0 signal board is designed to be plugged directly into the SIMATIC S7-1200 CPU. Ensure the CPU is powered down before attaching the module. The module is then electrically and mechanically connected to the CPU, with CPU mounting dimensions remaining unchanged. Refer to the S7-1200 system manual for specific slotting instructions.
Compatibility: This module is exclusively compatible with Siemens SIMATIC S7-1200 series CPUs. It is not compatible with other PLC series or different Siemens product lines.
Care: Keep the module clean and free from dust and moisture. Use a dry or slightly damp, lint-free cloth for cleaning. Avoid using solvents or abrasive cleaners. Ensure proper ventilation around the module within the control cabinet to prevent overheating.
