Kenable CAT6 Ethernet Cable - UTP RJ45 LS0H CCA 2m Blue

LS0H stands for Low Smoke Zero Halogen. This means the cable's outer jacket is designed to emit very little smoke and no toxic halogens when exposed to fire, making it safer for use in enclosed spaces.

Due to its Copper Clad Aluminium (CCA) construction, this cable is generally not recommended for PoE applications, as CCA can overheat under the electrical load required for PoE.

CCA cable uses an aluminium core clad with a thin layer of copper, making it lighter and cheaper. Pure copper cable uses a solid copper conductor, which offers better conductivity and performance, especially over longer distances or in high-interference environments.

Yes, this Cat6 cable is backward compatible with Cat5e devices. However, the network speed will be limited to the maximum speed supported by the Cat5e device.

Measure the distance between your devices and add a small buffer (e.g., 10-20%) to avoid tension. Avoid using excessively long cables, as this can sometimes impact performance, especially with CCA cables.

This cable is constructed to ISO/IEC 11801 and EN 50288 ANSI/TIA 568-C.2 standards.

Verify that both ends of the cable are securely plugged into their respective ports. Test the cable with a different device or port to rule out issues with the connected equipment.

Check for physical damage to the cable, such as kinks or frayed insulation. Ensure the cable is properly seated in the RJ45 ports. If the issue persists, try a different, known-good cable, especially if the run is long or in a high-interference area.

Inspect the RJ45 connectors for bent pins or debris. Ensure the cable is not being subjected to excessive tension or movement. Replace the cable if it shows signs of wear or damage.