Zefal Mudguard Set - Road/Hybrid Bike - Front & Rear

These mudguards are specifically designed for road and hybrid bikes with 700c / 28" wheels. They may not provide adequate clearance or coverage for wider mountain bike tires.

The Croozer Road front mudguard features a tool-free mounting system. The Swan Road rear mudguard requires a simple tool (often a screwdriver or Allen key, depending on the exact fitting) to tighten the MD-Turn system.

The Croozer Road front mudguard is designed to accommodate disc brake setups due to its adjustable width and mounting points on the fork. Compatibility with the rear triangle and seat stays should be checked on a case-by-case basis.

The Swan Road rear mudguard is 45mm wide. The Croozer Road front mudguard tapers and has a blade width ranging from 50mm to 70mm.

Clean with a soft cloth, mild soap, and water. Rinse thoroughly and dry. Avoid harsh chemicals or abrasive pads.

The MD-Turn system is a unique fitting mechanism for the rear mudguard that allows for secure and adjustable mounting onto the seat post using a simple tightening screw.

Ensure the seat post clamp diameter is within the 25-32mm range. Tighten the MD-Turn fitting screw firmly. Consider using a thin layer of grip tape on the seat post if it's on the smaller end of the compatible range.

Readjust the mudguard's position on the fork and stays. Use the adjustment feature to change its width (50-70mm) or angle to ensure sufficient clearance.

Check that all mounting screws and fittings are securely tightened. Ensure the mudguard is correctly aligned and not hitting any bike components.

Adjust the angle of the mudguard to cover more of the wheel. For the rear mudguard, ensure it's positioned as close to the tire as possible without touching.