Sika Setting Sand - Buff - 20kg

It can be walked on immediately and is fully trafficable within 1-2 days. However, avoid pressure washing for 28 days to allow for full curing.

It is specifically designed for joint widths of 2-5mm.

No, avoid using a pressure washer for the first 28 days after application to allow the product to fully cure.

Pour or sweep the sand into the joints, compact it, and saturate with water.

Yes, it is suitable for driveways, footpaths, patios, and other paved areas.

The joints should have a minimum depth of 25mm.

Coverage depends on the joint width, joint depth, and the size of the paving stones. Refer to the product packaging for specific coverage details.

Ensure the joints were properly compacted and saturated with water during application. If the problem persists, reapply the sand and ensure thorough saturation.

Make sure the joints are filled completely with the product. If weeds persist, consider applying a weed killer specifically designed for paving.

Ensure the joint widths are within the recommended 2-5mm range and that the product was properly saturated with water during application. If the problem persists, remove the existing sand and reapply.