Best current price£16.87from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£16.87Visit shop Startech.com Brocade 57-0000075-01 Compatible Sfp+ Module - 10Gbase-Sr
Visit shop
Amazon£30.98Visit shop StarTech.com Dell EMC SFP-1G-BX80-U Compatible SFP Module - 1000BASE-BX-U - 1 Gigabit Ethernet BiDi Fiber Single Strand SFP - LC 80km (SFP1GBX80UES)
Visit shop45 offers from £16.87 - £231.11
View price history by clicking the chart icon.
This StarTech.com SFP+ transceiver module (AR-SFP-10G-SR-ST) is designed for IT professionals and network administrators who need to establish high-speed 10 Gbps connections over multi-mode fiber. Its key benefit is providing reliable, compatible connectivity for Arista Networks equipment, supporting distances up to 300 meters. A minor consideration is its specific compatibility requirement for Arista Networks devices.
| Series | SFP+ |
|---|---|
| Model Part Number | AR-SFP-10G-SR-ST |
| Brand | StarTech.com |
This module supports a maximum transfer distance of 300 meters (984 ft) over Multi Mode Fiber.
This module is specifically designed, programmed, and tested for Arista Networks switches and routers. While it adheres to the SFP+ SR standard, guaranteed compatibility is limited to Arista devices.
You should use Multi Mode Fiber (MMF) optic cable with an LC connector for this module.
Yes, this SFP+ module features a hot-swappable design, allowing you to install or remove it without powering down your network equipment, thus minimizing network disruption.
DDM stands for Digital Diagnostics Monitoring. It allows you to monitor the transceiver's real-time operating parameters, such as optical output power, optical input power, temperature, and laser bias current.
The module has a Mean Time Between Failures (MTBF) of 498,745,585 hours, indicating a very high level of reliability and durability.
StarTech.com offers a lifetime warranty on this SFP+ transceiver module.
Verify that the device is an Arista Networks switch or router. Ensure the module is fully seated in the SFP+ slot. Try a different SFP+ slot on the device. If issues persist, contact StarTech.com support.
Check that the fiber optic cable is correctly connected to both the module and the remote device. Ensure the fiber cable is not damaged and is the correct type (Multi Mode Fiber) for the module. Verify the configuration on both ends of the link.
Inspect the LC connectors for dirt or damage. Clean the fiber optic cable ends if necessary. Ensure the fiber cable is within the 300-meter distance limit for Multi Mode Fiber. Check for potential electromagnetic interference if the cable runs near power sources.
Confirm that both the module and the connected device are operating at 10 Gbps. Review the network configuration to ensure no bottlenecks are present. Test with a different module or cable if possible.
Setup:
Compatibility:
Care:
