Best current price£89.00from Wex Photo Video
Shopping.co.uk recommended and popular offers
Wex Photo Video£89.00Visit shop Manfrotto 131D Accessory Arm - 3/8" Mount
Visit shop
Amazon£101.66Visit shop Manfrotto 131D Horizontal Double Head Accessory Arm - Silver (For Mounting 2 Heads At 90 Degrees, 3/8" Thread On Both Ends Of The Arm)
Visit shop3 offers from £89.00 - £101.66
View price history by clicking the chart icon.
The Manfrotto 131D Accessory Arm is a precision-engineered tool designed for studio and macro photographers who need to mount multiple pieces of equipment on a single tripod column. It provides the unique ability to position two camera heads at a 90-degree perpendicular angle, significantly expanding your shooting versatility. While it is an incredibly robust solution for complex setups, users should note that adding multiple heads can shift the center of gravity, requiring a sturdy tripod base to ensure complete stability.
| Brand | Manfrotto |
|---|
No, the 131D is an accessory arm only. You will need to provide your own 3/8-inch threaded tripod heads.
While it is designed for a 60mm disc, it will function on any tripod with a 3/8-inch stud, though the 60mm disc provides the best rotational stability.
The arm is robust, but the total weight capacity is ultimately limited by the weight rating of your specific tripod legs and the head being used.
It is quite heavy at 2.2 lbs and is better suited for studio or stationary location work rather than backpacking.
Use a bubble level on the tripod base first, then ensure the arm is screwed on tightly so it sits flush against the mounting disc.
Ensure the 3/8-inch connection to the tripod column is tightened fully; you may need to use a hex key or leverage tool to secure the base mounting point.
Check that the tripod head attached to the arm is properly tightened and verify that the total weight of the mounted equipment does not exceed the tripod's payload rating.
To install the 131D, ensure your tripod features a 3/8-inch stud and a 60mm mounting disc. Simply screw the arm onto the tripod's center column thread until it is hand-tight and secure. Once mounted, attach your tripod heads to the dual ends of the arm. It is critical to tighten the locking collars on your tripod heads effectively to prevent rotation. For maintenance, wipe the silver finish with a soft, dry cloth after use in dusty environments. Ensure the threads remain clean and free of grit to prevent cross-threading during installation, and store the arm in a padded gear bag to protect the machined ends from impact.
