Targus 100W GaN USB-C Wall Charger - Black

GaN (Gallium Nitride) technology allows for smaller, more efficient chargers. This means the Targus charger can deliver high power (up to 100W) in a compact size while generating less heat than traditional silicon-based chargers.

The charger has a maximum output of 100W, which is shared across all connected devices. While you can charge multiple devices simultaneously, the speed for each device will depend on its power requirements and the total power being drawn. The fastest charging will occur when fewer devices are connected, or when connecting to the primary 100W USB-C port.

The included plugs are compatible with power outlets in over 140 countries across the Americas, Europe, Asia, and Australia.

Yes, it supports fast charging. The USB-C ports support USB Power Delivery (USB PD) up to 100W, and the USB-A ports support Quick Charge up to 18W. The actual charging speed depends on the device's capabilities.

Yes, the charger supports universal voltage (100-240V) and comes with interchangeable plugs for use in over 140 countries. It also features built-in over-current, over-voltage, over-charge, and over-heating protection.

As a Targus product, it meets strict quality and safety standards. Specific warranty details can be found on the official Targus website or through the retailer where the product was purchased.

The charger is compact, measuring 83 mm in width and height, and 32 mm in depth. It weighs approximately 300 grams.

Ensure the charger is securely plugged into the wall outlet and the device's cable is fully connected. Try using a different USB-C or USB-A port on the charger. If charging a laptop, confirm the device supports USB-C Power Delivery and that the charger's output is sufficient. Check if multiple devices are drawing power simultaneously; try charging only one device to see if speed improves.

Some warmth is normal during charging, especially when powering high-draw devices. However, if the charger is excessively hot to the touch, unplug it immediately. Ensure the vents are not obstructed and that it is not covered by anything. Discontinue use if excessive heat persists, as this may indicate an internal issue.

Align the plug carefully with the charger's port. Apply firm, steady pressure to attach. To detach, gently pull the plug straight out while holding the charger body. Avoid forcing the connection, which could damage the pins or ports.

Verify that the wall outlet is functioning by testing it with another device. Ensure the correct international plug is firmly attached and properly seated. Check the charger and plug for any visible damage. If the issue persists, contact customer support.