Moore & Wright Digital Caliper - Water Resistant - 0-150mm
Moore & Wright 0-6"/0-150mm water resistant Digitronic Caliper
MW110-15WR
IP
Water Resistant Digi...Moore & Wright 0-6"/0-150mm water resistant Digitronic Caliper
MW110-15WR
IP
Water Resistant Digital Caliper by Moore & Wright allows you to
measure outside, inside, depth and step measurement, (4 way)
measurements and complies to standard DIN 862.
Features
--Digital functions: mm/inch conversion, on/off, zero setting, ABS/INC
--Patented ceramic capacitive sensor
--Thumb wheel for fine adjustment
--CR2032 battery
FOR OVERSEAS ORDERS PLEASE BE ADVISED THAT THIS ITEM WILL BE SHIPPED WITHOUT BATTERIES AS THEY CANNOT BE SHIPPED OVERSEAS
The Moore Wright Water Resistant Series Digital Calliper are fitted with a patented ceramic capacitive sensor and a large LCD display offering 4-way measurement (mm/inch, absolute/incremental). They can be zeroed at any point on the scale and are fitted with a conveniently located on/off switch. The callipers are manufactured to DIN 862 standards, and are water and dust resistant to IP54 specifications. Supplied with a CR2032 battery. Specification:Range: 0-150mm (0-6in).Resolution: 0.01mm (0.0005in).Jaws: 40mm.
Moore & Wright MW110-15WR IP45 Water Resistant Digital Caliper150mm (6in) The Moore & Wright Water Resistant Series Digital Caliperare...
Best current price£83.66from Blueperry agriculture (UK)
This Moore & Wright Water Resistant Digital Caliper (MW110-15WR) is designed for professionals and hobbyists who need precise measurements in challenging environments. Its key benefit is reliable, water and dust-resistant operation (IP54) for versatile 4-way measurements. A minor caveat is that batteries are not included for overseas shipments due to shipping restrictions.
All features
Model Part Number
MW110-15WR
Brand
Moore & Wright
Extended Product Information
FAQs
What does IP54 rating mean for this caliper?
IP54 means the caliper is protected against dust ingress (limited protection) and splashes of water from any direction. It is not designed for submersion.
Can I use this caliper in a dusty workshop?
Yes, the IP54 rating provides protection against dust, making it suitable for use in most workshop environments.
How do I convert between millimeters and inches?
Press the 'mm/inch' button on the digital display unit. The display will instantly switch to the selected unit.
What type of battery does this caliper use?
It uses one CR2032 lithium coin cell battery.
How do I perform a zero setting?
Slide the jaws to the desired starting position (e.g., fully closed) and press the 'ZERO' button. The display will reset to 0.00mm or 0.000in.
Where can I find the battery compartment?
The battery compartment is typically located on the back of the digital display unit. You may need to slide a small cover to access it.
What is the maximum measurement range?
The caliper has a measurement range of 0 to 150mm (0 to 6 inches).
Troubleshooting
Display does not turn on
Ensure a CR2032 battery is correctly inserted and has sufficient charge. Check that the battery cover is fully closed.
Inaccurate readings
Clean the measuring jaws and beam with a soft cloth. Ensure the caliper is zeroed correctly before measurement. Check for any physical damage to the jaws or slider.
Display shows erratic numbers
This could be due to low battery power or electronic interference. Replace the battery. Ensure the unit is not exposed to strong electromagnetic fields. Try resetting the caliper by removing and reinserting the battery.
Jaws do not close fully
Check for debris or damage on the inside edges of the jaws. Gently clean the jaws. If damage is present, contact customer support.
Water resistance compromised
Inspect the battery cover seal and any other potential entry points for damage. Ensure all seals are clean and intact. Avoid prolonged submersion, as IP54 is resistant to splashes, not immersion.
Pros and Cons
Pros
IP54 rating provides excellent protection against water and dust.
Versatile 4-way measurement capability.
Clear digital display with mm/inch conversion.
Durable construction meeting DIN 862 standards.
Precise fine adjustment with a thumb wheel.
Cons
Batteries (CR2032) must be purchased separately for overseas orders.
Jaws are 40mm, which may be limiting for very large or deep internal measurements.
Requires careful handling to maintain water resistance, despite the rating.
Setup, Compatibility & Care
Setup:
Ensure the caliper jaws are clean and free of debris.
Slide the battery cover open (usually located on the back of the display unit).
Insert one CR2032 battery, observing the correct polarity (+/-).
Close the battery cover securely.
Press the 'ON/OFF' button to power on the display.
Press the 'mm/inch' button to select your desired unit of measurement.
Press the 'ZERO' or 'ABS/INC' button to set the reading to zero, or to switch between absolute and incremental modes.
Compatibility:
This caliper measures in millimeters and inches.
It is compatible with standard CR2032 batteries.
It complies with DIN 862 standards.
Care:
After each use, wipe the jaws and beam clean with a soft, dry cloth.
For stubborn dirt or moisture, use a cloth lightly dampened with water or a mild cleaning agent. Do not immerse the caliper in liquid.
Ensure the caliper is completely dry before storing.
Store the caliper in its protective case in a dry environment to prevent damage and maintain accuracy.
Avoid dropping the caliper or subjecting it to impacts.
Periodically check the battery level and replace the battery as needed.
Blueperry agriculture (UK)£83.66Visit shop 
B&Q£88.83Visit shop 
eBay£91.44Visit shop 
