Control Relay - 3NO + 1NC - 24 Vdc - CA3KN31BD





Best current price£31.22from Tameson UK
Best offers
Shopping.co.uk recommended and popular offers
Schneider Electric Ca3 Auxiliary Relay - Ca3kn31bd
Visit shop




Best current price£31.22from Tameson UK
Shopping.co.uk recommended and popular offers
Schneider Electric Ca3 Auxiliary Relay - Ca3kn31bd
Visit shop4 offers from £31.22 - £95.72
View price history by clicking the chart icon.
6 offers from £10.09 - £21.95
View price history by clicking the chart icon.
This Schneider Electric CA3KN31BD control relay is designed for professionals in electrical control and automation seeking a reliable switching component. Its key benefit lies in its versatile contact configuration (3 NO, 1 NC) and robust 24 Vdc operation, enabling seamless integration into various control circuits. A potential caveat is that its primary application is for low-voltage DC control systems, requiring compatibility checks for AC or higher voltage uses.
| Series | CA3 KN |
|---|---|
| Model Part Number | CA3KN31BD |
| Brand | Schneider Electric |
Normally Open (NO) contacts are open (not conducting) when the relay coil is de-energized and close (conduct) when the coil is energized. Normally Closed (NC) contacts are closed (conducting) when the relay coil is de-energized and open (stop conducting) when the coil is energized.
No, this specific model (CA3KN31BD) is designed exclusively for 24 Vdc coil operation. Using it with AC power will damage the relay.
The exact contact current rating should be consulted in the detailed technical specifications provided by Schneider Electric. However, control relays of this type are typically rated for low-power signal switching, not heavy loads.
The CA3KN31BD can be mounted on a standard 35mm DIN rail or directly onto a panel using screws.
The relay weighs approximately 225 grams.
The dimensions are 45 mm (width) x 57 mm (depth) x 58 mm (height).
Verify the 24 Vdc power supply is active and correctly connected to the coil terminals (A1/A2). Check for loose connections or wire damage.
Ensure the coil is receiving the correct 24 Vdc voltage. Check if the contacts are clean and free from debris or pitting. If pitted, the contacts may need replacement.
Check the stability of the 24 Vdc supply voltage. Ensure connections are secure. Environmental factors like vibration could also be a cause.
Confirm the coil voltage is exactly 24 Vdc and not higher. Ensure the connected load does not exceed the relay's capacity.
Setup:
Compatibility:
Care: