Best current price£12.08from B&Q
Shopping.co.uk recommended and popular offers
B&Q£12.08Visit shop - 3 Pack E27 Bulb Holder Ceramic Porcelain Edison Screw Lamp Holder For Pendant Lighting Fixture White
Visit shop1 offer from £12.08
View price history by clicking the chart icon.
The B&Q E27 Bulb Holder (CL2R_10_01) is designed for DIY enthusiasts and homeowners looking to repair existing fixtures, restore vintage lighting, or build custom lamps from scratch. Its primary strength lies in its durable construction, which is specifically rated for high-temperature environments, ensuring safe operation for standard indoor lighting needs. While it offers excellent versatility for E27 screw-in bulbs, users should be aware that it is intended for indoor use only and requires basic electrical knowledge for a safe, secure installation.
| Model Part Number | CL2R_10_01 |
|---|---|
| Brand | DC VOLTAGE |
No, this product is designed for indoor use only and is not weather-resistant.
This holder is rated for a maximum of 60W.
Yes, as long as the LED bulb uses an E27 base and draws 60W or less, it is fully compatible.
Yes, it meets requirements for standard installations, but always consult with a qualified electrician if you are unsure about the wiring process.
If your shade ring matches the dimensions of the socket thread, it should fit, but please verify measurements before purchase.
Ensure the bulb is fully screwed into the base and that the terminal screws are tight and making contact with the wires.
Verify that the mounting hardware used to attach the socket to the fixture body is tightened correctly.
Immediately disconnect power, check for loose wiring that may be causing arcing, and inspect if the bulb wattage exceeds the 60W limit.
Installation should always be performed with the power supply disconnected to prevent electrical hazards. 1. Strip the insulation from your supply wires carefully to expose the copper. 2. Insert the wires into the provided screw terminal blocks on the base of the holder. 3. Tighten the screws firmly to ensure the wire is held securely in place. 4. Verify that no stray copper strands are visible outside the terminal. 5. Secure the housing and ensure all parts are snapped or screwed into place before testing. For care, keep the socket free of dust and debris, as build-up can trap heat. We strongly recommend waiting until you have the physical unit in hand before scheduling any professional installation to ensure measurements are verified.
