Hqc Durable Kitchen Matt Paint - Green

This paint is designed for interior walls and ceilings in kitchen areas. It is not intended for floors or surfaces that will be constantly submerged in water.

The paint is wipeable. Use a damp cloth with a mild detergent if necessary. Avoid using abrasive cleaners which could damage the finish.

For spray application, it is essential to remove filters and use a nozzle size between 0.019X and 0.026X. Failure to do so may lead to blockages or an uneven finish.

The paint contains insulating technology that can help reduce heat loss, which may indirectly help manage condensation. It is also breathable, allowing moisture vapor to escape.

Two coats are generally recommended for best results, providing optimal coverage, durability, and protection.

Drying time between coats is typically 2-4 hours, but always refer to the specific product instructions for the most accurate timing.

Ensure the surface was properly prepared (clean, dry, free from grease) and that any previous glossy finishes were lightly sanded.

Apply paint evenly, maintaining a wet edge to avoid lap marks. Use a good quality brush or roller. Consider a second coat after proper drying time.

Verify that filters have been removed and the nozzle size is within the recommended range (0.019X to 0.026X). Thin paint slightly if necessary, following guidelines for spray application.

Ensure the underlying cause of mould (e.g., excessive condensation) has been addressed. The paint offers protection but may not fully resolve severe underlying issues.