Cabinet Hinge - Merriway - White - Pack of 2
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and homeowners looking for reliable hardware for kitchen cupboard and cabinet doors. The Merriway White Cabinet Hinge, Pack of 2, offers a durable slide-on solution that provides a 95-degree opening angle. A potential consideration is ensuring precise alignment during installation for optimal performance.
All features
| Colour | White |
|---|---|
| Model Part Number | BH01741 |
| Brand | Merriway |
Extended Product Information
FAQs
What is the opening angle of these hinges?
These Merriway cabinet hinges provide a 95-degree opening angle.
Are these hinges suitable for all types of cabinets?
They are typically used for kitchen cupboard and cabinet doors. It's best to confirm compatibility based on your specific cabinet design and measurements.
How do I install these hinges?
These are slide-on hinges. You'll need to attach mounting plates to the cabinet frame and the hinges to the door, then slide the hinges onto the plates. Manufacturer instructions, if included, should be followed.
What material are the hinges made of?
The hinges are zinc-plated (ZP) for durability.
How should I clean the hinges?
Clean with a soft, damp cloth. Avoid using abrasive cleaners.
Does this pack include screws for installation?
Screws are typically not included with hinges and need to be purchased separately, suitable for your cabinet material.
What is the warranty on these hinges?
Please refer to the product packaging or manufacturer's website for specific warranty information, as it can vary.
Troubleshooting
Hinge squeaks or is stiff
Apply a small amount of silicone-based lubricant directly to the hinge joint. Avoid oil-based lubricants which can attract dust.
Cabinet door does not close properly or is misaligned
Check that the mounting plates and hinges are securely fastened. Use the adjustment screws on the hinge to fine-tune the door's position (up/down, in/out, left/right).
Hinge appears loose after installation
Ensure all screws are fully tightened into the cabinet and door. If the screw holes are stripped, consider using wood filler or slightly larger screws for a secure fit.
Hinge does not slide onto the mounting plate easily
Verify that the mounting plate is correctly aligned and securely attached to the cabinet frame. Ensure there are no obstructions on the hinge arm or mounting plate.
Pros and Cons
Pros
- Easy slide-on installation process
- Provides a wide 95-degree opening for good accessibility
- Durable zinc-plated construction ensures longevity
- Clean white finish complements various cabinet designs
- Comes in a practical pack of two
Cons
- Requires precise alignment for optimal door closure
- May not be suitable for very heavy cabinet doors without additional support
- Specific 95-degree angle might not fit all custom cabinet designs
Setup, Compatibility & Care
Setup: These are cruciform slide-on hinges. First, attach the corresponding mounting plates to the cabinet frame. Then, attach the hinge arms to the cabinet door. Finally, slide the hinge arms onto the mounting plates. Ensure all screws are tightened securely, but avoid over-tightening, which could strip the material. Adjustments can typically be made via screws on the hinge body to align the door correctly.
Compatibility: Designed for standard kitchen cupboard and cabinet doors. The 26mm hinge size is common for overlay or inset applications, but it's always recommended to measure your existing hinge mortise or cabinet requirements before purchasing.
Care: Clean with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the white finish or the zinc plating. Periodically check that all screws remain tight, especially after the initial installation and use.