E-Tech Silver Engine Enamel Paint - 250ml - Silver

It is ideal for engine blocks, valve covers, rocker covers, gear casings, and many other engine components.

Clean the surface thoroughly to remove rust, grease, and old paint. Degrease the area, and lightly sand the surface to provide a good key.

Apply thin, even coats, and allow each coat to dry thoroughly before applying the next. Multiple coats are typically recommended for full coverage and durability.

The paint will be touch-dry in about an hour, but allow several hours for full curing.

Yes, it is resistant to oils, fuels, chemicals, and road salt.

No, this paint is designed for temperatures up to 250°C and is not suitable for exhaust manifolds where temperatures are significantly higher.

Store the resealed tin in a cool, dry place away from direct sunlight.

If stored properly, the paint should last for several years. Always ensure the tin is properly sealed after use.

Ensure the surface is properly cleaned and degreased before application. Lightly sand the surface to provide a good key for the paint to adhere to.

Ensure the surface is properly prepared. Apply thin coats and allow them to dry fully before applying subsequent coats.

Ensure the paint is mixed properly before application. Apply an even coat and avoid applying too thick of a coat.