Best current price£30.28from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£30.28Visit shop Sealey Driveshaft Extractor Fork Set 2Pc
Visit shop
B&Q£44.00Visit shop B&Q - Vs962 Driveshaft Extractor Fork Set 2Pc
Visit shop8 offers from £30.28 - £44.00
View price history by clicking the chart icon.
The Sealey Driveshaft Extractor Fork Set is an essential tool for professional automotive mechanics and serious DIY enthusiasts who frequently perform drivetrain maintenance on vehicles where driveshafts are secured with spring clips. This 2-piece set allows for safe, damage-free removal of driveshafts by applying even, controlled pressure between the gearbox and the shaft. While it provides excellent leverage and protection for surrounding components, users should note that its specific 49mm jaw width is designed for standard automotive driveshaft applications and may not be compatible with heavy-duty or oversized industrial axle assemblies.
| Model Part Number | VS962 |
|---|---|
| Brand | Sealey |
The VS962 is primarily designed for passenger and light commercial automotive applications with a 49mm jaw width and is likely too small for heavy-duty truck axles.
When used correctly with even pressure, it is designed to prevent damage to seals; however, care should be taken not to gouge the seal surface while inserting the forks.
Using two forks allows for balanced force application, which prevents the driveshaft from tilting or binding inside the gearbox housing during removal.
While light tapping may be necessary to seat the forks, excessive force should be avoided to prevent damage to the gearbox housing.
Store in a cool, dry place and keep the working surfaces lightly oiled to prevent surface oxidation.
Ensure the driveshaft is pushed as far as possible toward the gearbox to create initial clearance, or check if an obstruction like a heat shield needs to be removed.
Ensure both forks are inserted evenly and at the same angle. Using only one fork often leads to tilting rather than a clean release.
Clean both the tool and the contact surface of the driveshaft to ensure no oil or grease is causing slippage.
Setup: Before use, ensure the vehicle is safely supported on jack stands and the transmission oil has been drained if required by the manufacturer's manual. Verify the driveshaft is fully disconnected from the wheel hub side to allow for linear movement.
Compatibility: This tool is compatible with most standard automotive driveshafts secured by internal spring clips. Always verify the gap between your specific gearbox housing and the driveshaft head is compatible with the 49mm jaw opening.
Care: After use, wipe the tools clean of grease and road grime. Store them in a dry, rust-free environment to prevent corrosion. Inspect the tapered edges periodically for burrs or chips; if burrs appear, file them down lightly to prevent damage to the next vehicle you service.
