DJI Power 1000 Mini Portable Power Station - 1008Wh LFP Battery, 1000W Max Output, 0-80% Recharge in 58 Mins

Please refer to the official DJI warranty documentation for the most up-to-date information on warranty periods and terms.

Yes, the DJI Power 1000 Mini supports pass-through charging, allowing you to charge the unit while simultaneously powering connected devices.

The number of devices depends on their individual power consumption. You can connect multiple devices as long as their total output does not exceed the power station's 1000W continuous output limit.

It is recommended to use solar panels that are compatible with the built-in 400W MPPT module, typically those with a suitable voltage range and sufficient wattage for efficient charging.

The USB-C cable is integrated. For issues related to the cable, please consult the user manual or contact DJI support.

Store the power station in a cool, dry environment, away from direct sunlight and extreme temperatures, to maintain battery health. Ensure it has some charge (e.g., 30-50%) for long-term storage.

The 'Mini' designation typically indicates a more compact and lighter design optimized for portability, often with a slightly lower capacity or output compared to larger models like the Power 1000 V2, which offers higher output (2600W).

Ensure the device is adequately charged. Check all cable connections. If the issue persists, contact customer support.

Verify that the connected device supports USB-C PD charging and that the cable is properly seated. Try a different USB-C cable or device.

Check if the connected appliance exceeds the 1000W continuous output limit. Ensure the battery is sufficiently charged. Clean any debris from the vents.

Confirm that solar panels are compatible and connected correctly. Ensure panels are exposed to direct sunlight. Check for any physical damage to the panels or cables.

Ensure ventilation ports are not blocked. Avoid using the unit in excessively high ambient temperatures or direct sunlight for prolonged periods. Allow the unit to cool down.