Panasonic AW-UB10E 4K Multipurpose Box Camera

V-Log provides a Logarithmic gamma curve that captures a wider dynamic range (13 stops on this camera), offering more flexibility for color grading in post-production to achieve a professional look.

Yes, the camera supports IP-based control, allowing remote operation via network connections. It's compatible with Panasonic's Media Production Suite and other control systems that support its IP protocols.

The camera features a Micro Four-Thirds mount, allowing compatibility with a wide range of lenses designed for this mount system.

The AW-UB10E supports NDI? HX2, RTMPS, and SRT, enabling flexible streaming and integration into IP-based workflows.

You can record video directly to SD, SDHC, or SDXC memory cards in MP4 (H.264/H.265) or MOV (H.264/H.265) formats.

The camera can be powered via PoE+ (Power over Ethernet), simplifying setup by using the same Ethernet cable for both data and power. It can also be powered using a compatible external power supply if PoE+ is not available.

Both 3G-SDI and HDMI output uncompressed video signals. 3G-SDI is common in broadcast for its robust connectors and longer cable run capabilities, while HDMI is widely used in consumer and professional video equipment.

Ensure the power cable is securely connected or the Ethernet cable is properly plugged into a PoE+ compliant port. Verify the power source.

Check that the correct video output (3G-SDI, HDMI, USB-C) is selected and connected to the display or capture device. Verify cable integrity.

Check your network connection, bandwidth, and router settings. Ensure the camera's IP address is correctly configured and not conflicting with other devices. Update camera firmware if available.

Ensure the lens is clean and compatible. Check if there are any obstructions in the camera's view. Try manually focusing to reset the autofocus system.

Verify the SD card is formatted correctly (FAT32, exFAT) and has sufficient free space. Try a different, compatible SD card.