Best current price£39.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£39.99Visit shop Vidaxl Thread Repair & Workshop Kits Equipment Steel Drill Tap Inserting Tool
Visit shop2 offers from £39.99
View price history by clicking the chart icon.
This comprehensive 131-piece thread repair kit from VidaXL is designed for mechanics, DIY enthusiasts, and workshop professionals needing to repair or replace damaged or stripped internal screw threads. Its key benefit is providing all necessary HSS (High-Speed Steel) tools and a variety of steel thread inserts for common metric sizes, ensuring durable repairs. A potential caveat is the learning curve for users unfamiliar with thread repair processes.
| Model Part Number | 210119 |
|---|---|
| Brand | VidaXL |
The drill bits and taps are made of High-Speed Steel (HSS). The thread inserts are made of steel.
The product comes with a 2 Years Guarantee.
The kit includes specific sizes: M5 x 0.8 x 6.7mm; M6 x 1.0 x 10.8mm; M8 x 1.25 x 10.8mm; M10 x 1.5 x 13.5mm; and M12 x 1.75 x 16.3mm. Match your repair requirement to these specifications.
While designed for general applications, it's primarily intended for metal threads. For softer materials like aluminum or plastic, different types of inserts or repair methods might be more suitable to avoid damage.
The carry case dimensions are H:3.0 x W:24.0 x D:36.0 cm.
The kit includes 110 steel threaded inserts in total across the five provided metric sizes. The exact quantity per size is not specified but is distributed to provide ample supply for each.
While the kit contains all the necessary tools, a basic understanding of mechanical principles and careful execution are recommended for best results. Practice on scrap material first if you are new to thread repair.
Ensure you are using the correct size drill bit for the thread insert and the tap. Apply adequate pressure and use a cutting fluid or lubricant. Check if the drill bit is dull.
Use a tapping fluid. Ensure the hole is drilled to the correct depth and diameter. Turn the tap with steady, even pressure, backing it out frequently to clear chips. Do not force the tap.
Verify that the correct tap was used to create the receiving thread. Ensure the thread insert is properly aligned with the tapped hole. Apply a small amount of lubricant.
Ensure the tang breaker is correctly positioned against the tang. Apply firm, downward pressure. If the tang is stubborn, a small punch may be used carefully.
Setup: The kit is designed for direct use. Select the appropriate drill bit and tap for the desired thread size. Drill out the damaged thread following the recommended size for the insert. Use the tap to create a new, larger thread in the drilled hole. Insert the thread coil using the dedicated inserting tool. Once installed, use the tang breaker to remove the protruding tang from the insert.
Compatibility: This kit is designed for standard metric internal screw threads (M5, M6, M8, M10, M12). Ensure the damaged thread corresponds to one of the sizes provided.
Care: Keep all components clean and dry to prevent rust, especially the steel tools and inserts. After use, return all pieces to their designated spots in the carry case. Periodically check the case for damage and ensure all parts are accounted for. Lubrication of the tap during use can improve performance and tool life.
