MDF Skirting Board - White - Chamfered
Best current price£163.20from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£163.20Visit shop - 18mm X 144mm Mdf White Primed Chamfered Skirting Board 4200mm (X4 Lengths)
Visit shopB&Q£163.20Visit shop All Offers
2 offers from £163.20 - £176.00
View price history by clicking the chart icon.
B&Q - 18mm X 144mm Mdf White Primed Chamfered Skirting Board 4200mm (X4 Lengths)
Free delivery in 1–3 days
£163.20
Visit shop
HomebaseMDF White Primed Chamfered Skirting Board 18 x 144 x 4200mm 4 Pack
Free delivery in 1–3 days
£176.00
Visit shop
Product Information
Full details
The B&Q Chamfered Skirting Board is an ideal solution for DIY enthusiasts and homeowners seeking a clean, modern aesthetic for their interior wall-to-floor transitions. Featuring a crisp, angled edge, this board provides a bold architectural finish that complements contemporary design styles. While the white-primed surface offers a convenient starting point for installation, users should note that a final topcoat of paint is required to achieve a durable and perfectly color-matched finish in the home.
All features
| Colour | White |
|---|---|
| Series | Chamfered |
| Brand | B&Q |
Extended Product Information
FAQs
Can I use this skirting board in a bathroom?
MDF is generally not recommended for rooms with high humidity or frequent direct water exposure, such as bathrooms, as it can swell if moisture penetrates the finish.
Do I need to prime these boards before painting?
No, these boards come factory-primed in white, so you can apply your topcoat directly after a light sanding.
What type of paint is best for the finish?
A standard wood-based topcoat, such as eggshell, satin, or gloss, works perfectly on the pre-primed MDF surface.
Can I fix these boards using only adhesive?
While high-strength grab adhesive is effective, it is highly recommended to use mechanical fixings like nails or screws in addition to adhesive for long-term durability.
How do I cut the chamfered edge correctly?
Use a sharp saw or mitre saw. To maintain the crisp line, ensure the board is held firmly against the saw fence to prevent vibration during the cut.
Troubleshooting
Board is bowing or not sitting flush against the wall
Check that the wall is plumb. If the wall is uneven, use a slightly thicker bead of adhesive or additional mechanical fixings to pull the board into alignment.
Paint is not adhering well to the primer
Lightly sand the factory-primed surface with a fine-grit sandpaper (e.g., 240 grit) to create a mechanical key for the topcoat.
Mitered corners do not match up perfectly
Check your saw angle settings. Even a half-degree difference will be visible on a chamfered profile; use a test scrap piece to calibrate your saw before cutting the final board.
Pros and Cons
Pros
- Modern chamfered profile offers a clean, architectural finish
- Pre-primed surface saves time on preparation and painting
- MDF construction prevents warping and ensures long-term stability
- Ready for immediate installation and final topcoat application
Cons
- Requires a final coat of paint to finish the installation
- Material is MDF and should be kept away from excessive moisture
- Not suitable for curved wall applications
Setup, Compatibility & Care
Before installation, ensure your walls are clean, dry, and flat. Measure the perimeter of the room accurately and add 10% extra for cutting waste. For fixing, use a suitable wood adhesive along the back of the board, potentially supplemented with headless pins for a seamless look. Since the boards are white-primed, simply lightly sand the surface with fine-grit sandpaper before applying your chosen topcoat. For maintenance, keep the boards dust-free with a microfiber cloth and avoid using harsh chemical cleaners that could damage the paint finish. If the board is installed in a room with higher humidity, such as a ground-floor area, ensure the bottom edge is adequately sealed with paint to prevent moisture ingress.