Allstar Performance Mud Flap - Black

The primary use is to protect competition vehicles from stones, gravel, and mud. It's commonly used as wheel arch liners or as protective mud flaps.

Yes, it's designed for competition vehicles like rally cars and 4x4s, but its customizable nature means it can be adapted for various vehicles needing debris protection.

While it functions as a mud flap, it is explicitly stated as non-MSA approved for mud flap use. Always check the specific regulations for your event.

The sheet dimensions are 310cm in length and 61cm in width.

The material is 2mm thick.

Use a sharp utility knife or strong scissors. For best results, mark your cut line clearly and proceed slowly and steadily.

It is manufactured from flexible high-density polyethylene (HDPE).

Ensure you are using a sharp, heavy-duty utility knife or shears. Score the line first before making the full cut, or consider using a heat gun briefly on the cut line for easier passage.

While flexible, the material has some memory. If it doesn't hold a curve, try gently heating it with a heat gun (do not overheat) and then holding it in the desired shape while it cools.

Use washers with your rivets or screws to distribute the pressure over a larger area of the HDPE. For very high-stress areas, consider reinforcing the mounting points.

Lay the sheet flat on a clean surface and place heavy, flat objects (like books or wood planks) on top of the creased areas for several hours or overnight to help it flatten out.