Best current price£5.66from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£5.66Visit shop Irwin® Light/Grey 10502184 Speedhammer Max Chisel Pointed 280Mm
Visit shop
B&Q£9.90Visit shop B&Q - 10502184 Speedhammer Max Chisel Pointed 280mm Irw10502184
Visit shop16 offers from £5.66 - £15.91
View price history by clicking the chart icon.
The Irwin Speedhammer Max Pointed Chisel is a high-performance demolition accessory designed for trade professionals and serious DIYers using SDS Max rotary hammers. Its primary benefit lies in its exceptional power transfer for breaking concrete and masonry, making it an essential tool for demolition and channel chasing; however, users should note it is specifically engineered for SDS Max systems and will not fit standard SDS Plus or hex shank tools.
| Model Part Number | 10502185 |
|---|---|
| Brand | Irwin |
No, this chisel is designed exclusively for SDS Max chucks, which are larger and have different locking mechanisms than SDS Plus.
While it can remove tiles, a pointed chisel may crack the underlying surface. A flat chisel is generally recommended for tile removal.
The chisel comes sharp from the factory. If it becomes dull after heavy use, it can be reground, but keep the metal cool to prevent annealing.
It is optimized for concrete, brick, stone, and general masonry materials.
Yes, always apply a small amount of dedicated SDS grease to the shank to protect both the chisel and your tool's chuck assembly.
Clean the debris out of the hammer chuck and ensure you have applied a thin layer of SDS shank grease to the chisel stem.
Check that the chisel is properly locked into the SDS Max chuck and that the hammer tool is not set to 'rotation' mode.
Ensure you are not applying extreme side-pressure while chiseling. Let the hammer's percussion action perform the penetration.
To ensure peak performance and tool longevity, always verify that your rotary hammer is set to 'hammer only' mode before attaching the chisel. Apply a small amount of SDS Max shank grease to the end of the chisel before insertion to reduce friction and heat buildup within the tool chuck.
