Best current price£59.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£59.99Visit shop B&Q - C1832V Pneumatic 18G Brad Nailer 10-32mm 2Nd Fix Finishing Air Nail Gun
Visit shop2 offers from £59.99
View price history by clicking the chart icon.
The Tacwise C1832V Pneumatic Brad Nailer is designed for professionals and DIY enthusiasts needing precision for intricate woodworking and finishing tasks. Its key benefit lies in its ability to accurately fire 18-gauge brad nails from 10-32mm, offering reliability and control. A potential caveat is its reliance on an air compressor for operation.
| Model Part Number | TACC1832V |
|---|---|
| Brand | Tacwise |
It uses 18-gauge brad nails with lengths ranging from 10mm to 32mm.
The operating pressure should be between 60 and 100 PSI.
The magazine has a capacity of 100 brads.
Yes, this is a pneumatic tool and requires a connection to an air compressor to operate.
This model features a contact trip trigger, also known as bump fire, allowing for rapid sequential firing.
Disconnect the air supply, then use the quick-release nose gate to access and remove the jammed nail.
No, it is designed for intricate and finishing work due to its use of 18-gauge brads. For heavier applications, a different gauge nailer would be more appropriate.
Check air pressure is within the 60-100 PSI range. Ensure the nailer is properly connected to the air supply. Verify the magazine is loaded correctly and the safety mechanism is not engaged. Ensure the nose is pressed firmly against the work surface for contact firing.
Increase air pressure slightly, ensuring it stays within the 100 PSI limit. Check nail length is appropriate for the material. Clear any obstructions in the nose area.
Lubricate the tool with pneumatic oil. Check air hose for kinks or leaks. Ensure air compressor is delivering adequate CFM.
Disconnect air supply. Engage the quick-release nose gate and carefully remove the jammed nail. Ensure correct nail collation is used.
Setup:
Compatibility:
Care:
