Bartoline Teak Oil Trigger Spray Wood Sealer - 500ML

For outdoor furniture, apply every 3-6 months. For indoor items, application frequency depends on usage and environmental conditions.

No, it is designed for use on bare or previously oiled wood. It is not suitable for painted or varnished surfaces.

Rinse the nozzle under warm water and try again. Ensure the can is stored properly to prevent clogging.

No, it is not recommended for surfaces that come into direct contact with food.

Wipe with a damp cloth. Avoid harsh chemicals or abrasive cleaners.

It is generally recommended to remove any existing treatments before applying this product. Follow the manufacturer's instructions for the best results.

It is most effective on hardwoods like teak, oak, and mahogany.

Store in a cool, dry place, away from direct sunlight and heat sources.

Ensure you are spraying evenly and from the recommended distance. Wipe away any excess oil immediately after application.

Make sure the wood is clean and dry before application. Lightly sand the surface if necessary to improve absorption.

Too much oil was applied. Wipe away the excess with a clean cloth and allow more time to dry.

Reapply the oil, ensuring full coverage, and allow for adequate drying time. The surface may need a light sanding before reapplying.