JCP Fixings Rosett Cavity Fixings - Red - M5 x 90mm

These Rosett cavity fixings are designed specifically for cavity walls, such as plasterboard, hollow block, or composite walls.

You will need an M5 bolt or screw to use with these fixings.

While they offer a strong hold for medium-duty items, for very heavy fixtures like large TVs, it is recommended to consult a professional or use fixings specifically rated for such loads, possibly requiring drilling into wall studs.

The length of these specific Rosett cavity fixings is 90mm.

The polypropylene construction offers some resistance, but prolonged exposure to harsh weather conditions may degrade the material over time. Best suited for internal applications.

Each pack contains 30 JCP Fixings Rosett Cavity Fixings.

The recommended drill bit size depends on the specific wall material, but it should be chosen to create a hole that allows the fixing to expand properly within the cavity. Consult the packaging or a technical guide for precise dimensions.

The pilot hole may be too large. Try using a slightly smaller drill bit or ensure the fixing is fully expanded within the cavity before tightening.

Verify that the fixing is installed in a true cavity wall and not solid masonry. Ensure the fixing has deployed correctly within the cavity. The wall material may be too thin or brittle for optimal grip.

Ensure you are using an M5 bolt or screw. Check the bolt for any damage or debris that might be preventing proper threading.