Corfe Spear Top Low Double Gate - Black

The gate is constructed from solid steel, featuring heavy-duty 25mm x 25mm box section frames and 16mm diameter infill bars.

No, a fittings pack is included, but screws for installation are not provided and must be sourced separately.

The gate is supplied with a base coat of primer. It needs to be painted with a suitable exterior paint finish to protect the steel from rust and achieve the desired aesthetic.

Yes, a made-to-measure service is available for custom sizing requirements. Please inquire about the made-to-order process.

The dimensions indicate the post-to-post gap size the gate is designed to fit. The actual physical size of the gate is slightly smaller to allow space for the hinge and latch mechanisms.

The Corfe Spear heads are black.

Regularly inspect the painted surface for damage and touch up as needed. Clean with a damp cloth and ensure all protective coatings are intact to prevent rust.

Utilize the adjustable hinges to raise or lower the gate until it is level and swings freely.

Check for any obstructions or misalignment between the bolt and its housing. Slightly adjust the gate or bolt position if needed.

This indicates the protective paint coating has failed. Clean the rusted area thoroughly, apply a rust converter or primer, and repaint the affected area immediately.

Inspect hinges and closing bolt for dirt or debris. Clean and lubricate all moving parts. Ensure the gate is not rubbing against the ground or posts.