TRYX PANORAMA SE 360mm ARGB AIO Liquid Cooler - White

Check the product specifications for a list of supported sockets. Common examples include Intel LGA 1700, 1200, 115x, and AMD AM5, AM4.

Connect the ARGB cable to your motherboard's 5V ARGB header or a separate controller. Use software like ASUS Aura Sync, MSI Mystic Light, or Gigabyte RGB Fusion to customize the lighting effects.

It is recommended to check and clean the cooler every 3-6 months, depending on your environment. Clean the fans and radiator of dust and debris with compressed air.

If the pump fails, your CPU will overheat. Monitor your CPU temperature and contact the manufacturer for warranty service. It is advisable to shut down your system immediately if the CPU temperature becomes too high.

Mount the radiator in a location with good airflow, typically at the top or front of your PC case. Ensure there is enough space for the 360mm radiator.

Check the product documentation or the manufacturer's website for warranty information. Warranties typically cover manufacturing defects for a specified period.

Check if the pump is running (listen for a low hum). Ensure the water block is properly mounted on the CPU. Verify that the fans are spinning and that the radiator is clear of obstructions. Check thermal paste application.

Check the ARGB connections to the motherboard or controller. Ensure that the correct software is installed and configured. Verify that the lighting is enabled in the software.

Check for obstructions to the fans. Clean the fans and radiator of dust. Ensure the fans are correctly connected and that the fan curves are properly configured in the BIOS or software.

If the pump is making excessive noise, try adjusting the fan speed. Make sure the pump is correctly mounted.