Omnidirectional Antenna - Kenvox - M-114010
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Kenvox M-114010 is an amplified omnidirectional antenna designed for VHF and UHF signals, ideal for users on caravans, recreational vehicles, and boats. Its key benefit is versatile signal reception in mobile or outdoor environments. A potential caveat is the need for an amplified signal source, which may not be suitable for all locations. This antenna features a unique triangle design with two adjustment points for optimal positioning, is easy to assemble, and has been tested to withstand high wind speeds.
All features
| Model Part Number | M-114010 |
|---|---|
| Brand | Kenvox |
Extended Product Information
FAQs
Is this antenna suitable for indoor use?
While it can technically be used indoors, it is designed and optimized for outdoor mobile applications like caravans and boats for best performance.
Do I need to point this antenna in a specific direction?
No, the Kenvox M-114010 is omnidirectional, meaning it receives signals from all directions simultaneously. You may need to adjust its tilt for optimal signal strength.
What type of cable does it use?
This antenna typically uses a standard coaxial cable (e.g., RG6 or similar) for connecting to your television. Please refer to your specific product manual for exact specifications.
What is the power requirement for the amplifier?
The amplifier requires a power source, usually from the vehicle's electrical system (e.g., 12V or 24V). Consult the product manual for precise voltage and current requirements.
How is the tilt adjustment useful?
The variable tilt feature allows you to fine-tune the antenna's angle to better capture signals from broadcast towers that may not be perfectly horizontal to your location, potentially improving reception quality.
Can this antenna receive both digital and analog signals?
The antenna is designed for VHF and UHF frequencies, which are used for digital terrestrial television (DTT) broadcasts. It may not be suitable for older analog systems.
Troubleshooting
No channels found after setup
Ensure the amplifier is powered on and properly connected. Verify the coaxial cable is securely attached to both the antenna and the TV. Re-run the channel scan on your TV. Check if the antenna is positioned optimally, adjusting the tilt if necessary.
Weak or pixelated signal
Adjust the antenna's tilt angle to find the best reception. Ensure there are no obstructions between the antenna and broadcast towers. Check for interference from other electronic devices. If signal strength is consistently low, verify the amplifier is functioning correctly.
Antenna unstable in wind
Ensure all mounting hardware is tightened securely. If mounting on a flexible surface, consider reinforcing the mounting point. Check that the antenna itself is correctly assembled, as loose parts can affect stability.
Pros and Cons
Pros
- Omnidirectional reception simplifies setup and use.
- Amplified signal enhances reception quality in challenging environments.
- Robust design is wind-resistant for stable performance.
- Adjustable tilt allows for better signal optimization.
- Easy to assemble and install across different vehicle types.
Cons
- Requires a power source for the amplifier.
- May be less effective than a directional antenna in areas with very strong, specific signal sources.
- Amplification might introduce noise in extremely strong signal areas.
- Specific dimensions not provided, potentially impacting space considerations.
Setup, Compatibility & Care
Setup:
- Assemble the antenna components as per the included instructions. Due to its design, this is typically a quick process.
- Mount the antenna securely to the roof or a suitable elevated point on your caravan, RV, or boat.
- Connect the antenna's coaxial cable to your television's antenna input or a signal booster/splitter if applicable.
- Connect the power supply for the amplifier to a suitable 12V or 24V source (check product manual for specific voltage requirements).
- Perform a channel scan on your television to find available broadcasts.
Compatibility:
The Kenvox M-114010 is designed for VHF and UHF frequencies, making it compatible with most digital terrestrial television broadcasts. Ensure your television has a tuner capable of receiving these signals.
Care:
- Periodically check the mounting hardware for tightness.
- Clean the antenna surface with a soft, damp cloth if it becomes dirty. Avoid harsh chemicals or abrasive materials.
- Ensure all connections are clean and secure to prevent signal loss.