11Pc Holesaw Kit - BARGAINS-GALORE
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 11-piece holesaw kit from BARGAINS-GALORE is designed for DIY enthusiasts and professionals needing to cut clean holes in wood, plasterboard, and thin sheet metal. Its key benefit lies in the durable carbon steel construction and sharp teeth for precise, efficient cuts up to 25mm deep. A minor caveat is that it's intended for lighter gauge materials and may not be suitable for heavy-duty or prolonged industrial use.
All features
| Model Part Number | 5056316723701 |
|---|---|
| Brand | BARGAINS-GALORE |
Extended Product Information
FAQs
What materials can this holesaw kit be used on?
This kit is designed for cutting wood, plasterboard, and thin sheet metal. It is not recommended for use on hard metals, masonry, or thick steel.
What is the maximum cutting depth?
The maximum cutting depth for this holesaw kit is 25 mm.
How do I maintain the holesaws to prevent rust?
The holesaws come with a protective oil coating. After use, clean them thoroughly and reapply a thin layer of oil if needed, then store them in the case.
Are the pilot bits replaceable?
Yes, the pilot bits are attached to the arbors and can be removed. Replacement arbors with pilot bits are included in the kit.
What sizes of holesaws are included?
The kit includes 8 carbon steel hole saws in the following sizes: 19mm, 22mm, 29mm, 32mm, 38mm, 44mm, 51mm, and 64mm.
Does this kit come with a storage case?
Yes, the 11-piece holesaw kit includes a durable blow-moulded storage case for organization and protection.
Can I use this kit with any drill?
The kit is compatible with standard drills that have a 1/4" or 3/8" chuck, which is where the included arbors attach.
Troubleshooting
Holesaw not cutting cleanly
Ensure the saw teeth are sharp. Clean any debris from the teeth. Check that the drill is set to an appropriate speed (lower speeds for denser materials) and is not wobbling. Verify you are using the correct holesaw for the material.
Arbor not fitting securely in drill
Confirm you are using the correct arbor size (1/4" or 3/8") for your drill's chuck. Ensure the drill chuck is fully opened to accept the arbor shank and then tightened securely.
Excessive heat during use
Slow down your drilling speed and use a steady, consistent pressure. For wood, consider using a lubricant like wax or cutting fluid. Ensure the holesaw is not binding in the material.
Difficulty removing cut material
Gently twist the holesaw backward slightly after completing the cut to loosen the material. Some kits include a small slot for a screwdriver to help eject the core.
Pros and Cons
Pros
- Offers a good range of common hole saw sizes for various tasks.
- Durable carbon steel construction ensures longevity.
- Sharp teeth provide clean and precise cuts.
- Comes with necessary arbors and an allen key.
- Includes a sturdy storage case for organization.
Cons
- Cutting depth is limited to 25mm.
- Best suited for wood, plasterboard, and thin sheet metal; not for heavy-duty materials.
- Carbon steel may require occasional re-sharpening for optimal performance.
- Pilot bits are standard and may not be ideal for all drill types.
Setup, Compatibility & Care
Setup:
- Select the desired holesaw size.
- Attach the appropriate pilot bit arbor (1/4" or 3/8") to the holesaw using the provided allen key.
- Insert the arbor into your drill chuck and tighten securely.
- Ensure the pilot bit is centered on your marking before drilling.
Compatibility:
- Compatible with standard drills featuring a 1/4" or 3/8" chuck.
- Suitable for use with wood, plasterboard, and thin sheet metal (typically under 1mm thickness).
Care:
- After each use, clean any debris from the saw teeth and arbor.
- Wipe the holesaws with a dry cloth to remove dust.
- Periodically check the protective oil coating; reapply a thin layer if signs of rust appear.
- Store the kit in its original blow-moulded case to protect the components from damage and moisture.